Name: NSK High-Speed Drill: Product Demonstration
Uploaded: 2025-03-11T00:00:00Z
Channel: Arthrex
Description: This video demonstrates the setup and maintenance of the NSK Primado 2 system.

Empregos

Human

_blank

Corporativo

Sobre a Arthrex

Eventos comunitários

Divulgação da cadeia de suprimentos global

Locais

Bolsas e doações

Segurança do produto

Gerenciamento de risco e conformidade

Patentes

Notícias

SBA Support

Veja eventos, laboratórios e oportunidades educacionais

Contacte um representante

Inscreva-se para receber: O que há de novo na Arthrex?

Educação médica

Descrição dos cursos

Calendário dos cursos

ArthroLab™ - Locais

Nossa equipe de educação médica

OrthoPedia

Privacidade

Aviso Legal

Ethics Helpline

Entre em contato

Ajuda

Cookie Settings

Paciente - Página inicial

ACLTear.com

AnkleSprain.com

BunionPain.com

ArthrexEndoscopicSpine.com

OrthoPedia Patient

ShoulderReplacement.com

TheNanoExperience.com

JointPreservation.com

Shoulder

Procedure

Impulsionando a inovação com os mais recentes produtos e procedimentos tecnológicos para tratar uma variedade de condições do ombro.

Ombro

Team Home Templated (A)

Knee

Há mais de 25 anos, a Arthrex vem mantendo sua dedicação a um único objetivo: responder as necessidades do cirurgião ortopédico, ajudando a tornar os procedimentos cirúrgicos tecnicamente exigentes mais simples, mais seguros e mais reprodutíveis. Como empresa privada, a Arthrex tem um comprometimento exclusivo com o cirurgião ortopédico e os pacientes que tratam. O orgulho que temos da nossa contribuição de importância médica é a essência de nosso comprometimento único e inflexível com a qualidade dos produtos, educação e competência de habilidades cirúrgicas, serviços pessoais inigualáveis da nossa indústria. A experiência que acumulamos e a inovação constante na reconstrução do joelho são redefinidas com o lançamento da nova geração de produtos para reconstrução de ligamentos do joelho e tecnologia de reparo. A Arthrex reconhece e aprecia os comentários e cooperação dos cirurgiões de todo o mundo para a evolução do desenvolvimento desta nova abordagem abrangente para tratamento de lesões do joelho.

Joelho

Elbow

A Arthrex oferece vários produtos novos para a realização de procedimentos abertos ou artroscópicos no cotovelo, incluindo um conjunto abrangente de instrumentos para artroscopia de cotovelo, posicionador de cotovelo, passador de sutura, cânulas, dispositivos para fixação de tecido mole, sistemas de reconstrução de ligamento colateral medial e ligamento colateral lateral para lesões traumáticas e de esporte.

Cotovelo

Hand and Wrist

Mão e punho

Foot and Ankle

Pé e tornozelo

Quadril

Orthobiologics

Ortobiológicos

Cardiothoracic Surgery

Cirurgia cardiotoráxica

Spine

Coluna vertebral

Product

Imaging and Resection

Imagem e ressecção

Linha direta de codificação

eDFUs (Instructions for Use)

Global Enterprise Labeling System (GELS)

Unique Device Identifier (UDI)

Solicitações de exposições, congressos e workshops

Rep Site

The Arthrex Surgeon App

Facebook

Instagram

LinkedIn

Twitter

Youtube

Vet Systems

SAP Supplier Portal

Synergy Imaging & Resection

Artroplastia 

Trauma

Área de interesse

eDFU (Instruções de uso)

Acesso ao mercado e reembolsos

Recursos

Procedimento

Artroplastia

UDI (Unique Device Identifier) 

Produto

NOVIDADAS DA ARTHREX

Doações corporativas

Corporate Responsibility Report

Política ambiental da Arthrex

Prêmios

Cadeia global de fornecimento

Visão geral do produto

Centro de segurança

ASC X

Administradores

Acesso à inovação

Eficiência na sala de operações

Experiência da equipe perioperatória

Cadeia de suprimentos

Ferramentas para experiência do paciente

Experiência do cirurgião

Arthrex Armour Technology Protection

Paciente

Guias de codificação

Informações de contato

Perguntas frequentes

Links para recursos

ACESSO AO MERCADO E REEMBOLSO

eDFU - Atualização da política

Garantia de produto da Arthrex nos EUA

General Product Information

Solicitação de material de marketing

Product Feedback Form

Formulário de solicitação para novos clientes

RECURSOS PARA CLIENTES

This video demonstrates the setup and maintenance of the NSK Primado 2 system.

Not Hidden

English  - en

video

VID1-007128-en-US | A | NSK High-Speed Drill: Product Demonstration

Animations demonstrating the features and benefits of a specific product.

Animationen, die die Funktionen und Vorteile eines bestimmten Produkts demonstrieren.

Produktdemonstrationen

Product Demonstrations (Videos & Animations)

Animações demonstrando os recursos e benefícios de um produto específico.

Vídeos de demonstração de produtos

Animaciones que demuestran las características y beneficios de un producto específico.

Videos de demostración de productos

Product Demonstrations

NSK High-Speed Drill: Product Demonstration

Introducing NSCs to total surgical system. Let's get started. Power the control unit on. Here's the home screen where you can adjust the speed. Irrigation control. Forward and reverse. You can set the speed and irrigation flow rate by pushing the up down button or moving the track bar. You can adjust additional settings from the control unit, such as forward and reverse priming. Irrigation programming the foot pedal, selecting a specialized handpiece like a perforator or super slim handpiece, and more. Connecting the foot pedal is the same whether you have the single or multifunction foot pedal. Connect the foot pedal by matching the red dot on the foot pedal plug and the red dot on the foot pedal connector. Push the plug all the way in. You'll see the foot pedal indicator illuminate at the bottom of the screen, letting you know it's connected properly. The process for connecting a motor is identical. Connect to either port A or port B by matching the red dots. If necessary, you can connect up to two motors at one time to the control unit. Pro tip if this is the first time connecting a motor, be sure to check the acceleration, brake, and torque settings before using with the motor connected. Press the wrench icon on the lower right front panel and then select motor. Press the up down button to the desired level based on your preference. The Yamato two has a built in memory function that remembers the last level selected to disconnect the motor or foot pedal. Hold the plug near the red dot and pull straight back. Do not twist. This will release the locks and allow you to pull the plug out of the connector port. Now we'll show you how to connect a few different style Handpieces to Pomato two. To connect slim motor, locate the circle on the motor and the triangle on the handpiece. Line them up and press the handpiece into the motor. This is the same process for all Handpieces attaching to a slim motor to disconnect. Hold the motor and handpiece firmly and pull apart. Do not twist. Here's how to set up a perforator for a cranial procedure. Connect the perforator handpiece to a two slim motor by locating the circle on the motor and the triangle on the perforator. Line these up and press the perforator into the motor. To load a perforator bit. Pull down on the lock at the distal end of the perforator while holding it down. Insert the perforator bit into the perforator, twist until it seats in, and then release the lock. Check to make sure the bit is securely locked in by giving it a gentle pull to disconnect. Hold the motor and the perforator firmly and pull apart. Do not twist. When you use the craniotomy handpiece, it's important to note that handpiece and dura guard are separate pieces. Load the burr into the craniotomy handpiece. Ensure the burr is seated by twisting the burr left or right. Lock the burr in place by twisting the Colette until the key lines up with the picture of the locked lock. Pull up on the burr to ensure it is locked properly. Now slide the dura guard over the burr. Twist the guard so that the two pegs on the craniotomy handpiece seat into the holes inside the dura guard. The burr should almost touch the flat part of the dura guard. You will see arrows for open and close. Twist the Colette on the dura guard toward close until finger tight. When using P300 standard attachments, it's important to note these have a universal burr length. Ensure the indicator mark is in the unlocked position. Insert the burr in the burr shaft and twist clockwise until seated. To adjust exposure length, pull down on the knurling grip and twist to the left and set desired length to telescope. Pull down on the knurling grip and rotate to the right or left for desired exposure length. You'll see the different lengths of exposure by the indicator mark on the handpiece. The burr has markings on the shaft as well. To attach the burr guard, slide it over the burr shaft so that it covers the triangle on the shaft. If you are using the P 300 slim attachments, select the desired hub and burr shaft and press them together to build the attachments. Ensure the knurling on the hub has the arrow over the unlocked lock. Insert the burr in the burr shaft, ensuring all laser marked lines are down the shaft and twist the knurling to the left so the arrow is over the locked lock. To telescope, unlock the burr by twisting the knurling to the right so the arrow is over the unlocked lock. Pull the burr out to the desired exposure length and lock the burr again by twisting the knurling to the left so the arrow is over the locked lock. To attach the burr guard or hood, slide it over the burr shaft so that it covers the triangle on the shaft. The Primato two systems irrigation feature allows you to irrigate directly through Primato two. If your preference is to irrigate manually, you can skip this step. To use the irrigation feature, open the pump cover on the right side of the control unit by rotating the knob towards open. Insert the irrigation tube with the section with no blue line into the irrigation pump, so the needle side of the irrigation tube is positioned on the right hand side of the pump. Securely. Place the irrigation tube stoppers into the guide parts located at both ends. Rotate the knob to the closed position. Insert the irrigation pole by sliding it into the stand on the back of the unit. Spike the irrigation bag and open the clamp on the tubing. Slide the irrigation nozzle over the burr shaft with the straight end pointing toward the distal end. Press the tubing into the proximal end of the nozzle on the front of the control unit. Press and hold the image of the tubing on the bottom right of the screen to prime the tubing. You can also control the irrigation flow rate by adjusting the up down arrow or by sliding the track bar. When using a bone motor with a saw attachment, there will be four alignment holes on the attachment and one alignment pin on the motor. Push the attachment straight end to the bone motor. Twist the attachment left or right to ensure the pin and alignment holes are connected. Acted, then twist the removal ring to the left to tighten. If using a hand switch motor, slide the safety lock on the top of the hand. Switch into the on position. Once in the on position, depress the hand switch to operate the motor to load a blade into the sagittal attachment. Depress the fitting and removal button and fit the alignment holes of the blade into the convex part of the attachment. By releasing the fitting and removal button, the blade is set in place. Ensure the blade is in place securely with the fitting and removal button. By twisting the opposite side of the fitting and removal button left or right to load a blade in the oscillating attachment, pull down the removal lever and fit the alignment holes of a blade into the convex part of the attachment. By releasing the removal lever, the blade is set in place to load a blade in the reciprocating attachment, insert a blade into the attachment while depressing the fitting and removal button, and push it in further by lightly twisting the blade by releasing the fitting and removal button. The blade is set in place. The use of Pana Spray Plus can help the longevity of your handpieces by expelling matter in the handpiece and lubricating the ball bearings. Use of Pana spray happens in SPD before sterilization. Remove the white cap on the top of the bottle of Pana spray. Attach the silver fitting over the top of the Pana spray bottle. Optionally, you can slide the nozzle holder over the top of the silver fitting. If not done already, insert the open end of the tubing into the top of the black valve. Open the black valve by rotating it up so that it's with a cloth or towel, and press down on the button on top of the spray nozzle until the liquid coming out of the handpiece is clear. This should only take a few seconds to remove the handpiece. Press the release button on the adapter and pull the handpiece away from the adapter.

NSK High-Speed Drill: Product Demonstration

Related Pages

Spine

Discectomia endoscópica torácica transforaminal

Product

Spine

Discectomia lombar endoscópica interlaminar

Product

Spine

Interlaminar Endoscopic Lateral Recess Decompression

Product

Spine

Far Lateral Transforaminal Endoscopic Lumbar Discectomy

Product

Spine

Endoscopic Trans-SAP Approach for Lumbar Discectomy

Product

Spine

Discectomia lombar endoscópica transforaminal

Product

Spine

Foraminotomia e descompressão cervical

Procedure

Procedimento

Producto

Educação médica

Corporativo

Recursos

Paciente

Empregos