BioComposite Labral SwiveLock Anchor, 3.5 mm x 15.8 mm

Bio-Composite SwiveLock Fadenanker, 3.5 x 15.8 mm, perforiert

Suture Anchor, BioComposite SwiveLock, 3.5 x 15.8 mm, Vented

Anclaje de sutura, SwiveLock de BioComposite, Ø 3.5 mm x15.8 mm, fenest

ANCORA DE SUTURA BIOCOMPOSTA SWIVELOCK (3.5MM X 15.8MM)

Finished Product

AR-2325BCC

Human

Âncora de sutura, BioComposite SwiveLock

Shoulder

Product

The screw-in, knotless Labral SwiveLock anchor is specially designed for treating shoulder instability and is used similar to a Labral PushLock® anchor. Offering the same knotless advantages as the Labral PushLock anchor (eg, low profile, quick, suture-first technique with multiple stitch configuration options), this anchor provides the added benefits of higher pullout strength and vents that may allow bony ingrowth. The anchor is available in biocomposite or PEEK material.

Labral SwiveLock® Anchor

Child (D)

Knee

Patients with patellar instability suffer from recurrent patellar dislocations and are limited in their performance of activities of daily life.
In order to create congruent bony anatomy, the sulcus deepening trochleoplasty procedure helps patients get back to daily living activities.
Deepening trochleoplasty demands precise surgical skills and customized technical solutions for each individual patient and indication. The new Arthrex Trochlea Guide System enhances reproducible cartilage preparation, with 3 mm and 5 mm Offset Aiming Guides and effective, solid bone modelation with the dedicated 2.9 mm Burr. In conjunction with Arthrex PushLock® or SwiveLock® anchor fixations, this technique offers a solution for an anatomic trochlea recreation.
Please note that certain bio (PLLA) anchors and screws are not available for sale in EMEA.

Trochleoplasty

Procedure

Knotless 1.8 FiberTak® soft anchors and SwiveLock® anchors offer solutions for repairing HAGL and RHAGL lesions.

HAGL and RHAGL Lesion Repair

The SwiveLock anchor is designed for knotless, arthroscopic glenohumeral joint instability repair. It is sized and used similarly to the 2.9 mm&nbsp;PushLock® anchor, with the key difference being its&nbsp;threaded and vented anchor body, which&nbsp;"twists in"&nbsp;rather than&nbsp;"taps in.” The SwiveLock anchor provides the ability to independently pass the suture through a desired amount of tissue prior to anchor implantation. This feature allows the surgeon to properly capture the amount of capsule or labrum required for the pathology being treated. The surgeon can visualize and adjust tissue tension prior to final implant installation. The anchor is twisted into its final position and the sutures are cut flush.
The body of the anchor is available in a biocomposite material that combines PLLA with ß-TCP, or a nonabsorbable thermoplastic material, polyetheretherketone (PEEK). Both are strong, revisable, and radiolucent implants. Both versions use a PEEK eyelet for superior strength during insertion, allowing for firm tissue tensioning and shifting.

SwiveLock® Instability Technique - Anterior

The SwiveLock®&nbsp;anchor is a knotless suture anchor designed for arthroscopic glenohumeral joint instability repair. It is sized and used similarly to the 2.9 mm PushLock® anchor, but features a threaded and vented anchor body "twists-in" rather than "taps-in". The anchor allows the suture to be passed through the desired amount of tissue independently, before the anchor is implanted. This feature allows the surgeon to properly capture the amount of capsule or labrum required for the pathology being treated. The surgeon can visualize and adjust tissue tension prior to final implant installation. The anchor is twisted into its final position and the sutures are cut flush.
The body of the anchor is available in a biocomposite material that combines PLLA with ß-TCP, or a nonabsorbable thermoplastic material, polyetheretherketone (PEEK). Both are strong, revisable, and radiolucent implants. Both versions use a PEEK eyelet for superior strength during insertion to allow firm tissue tensioning and shifting.

SwiveLock® Instability Technique - Posterior

The fully threaded, knotless SwiveLock C anchor is designed for use with FiberWire® or FiberTape® sutures during rotator cuff repair with the SpeedFix™, SutureBridge™, or SpeedBridge™ technique. The Labral SwiveLock anchor is available for instability repair and provides very high pullout and insertion strength while saving time.1 SwiveLock anchors are cannulated and vented to minimize material and allow for potential bony ingrowth.2 The anchors are available in multiple sizes, and in bioabsorbable biocomposite or PLLA and nonabsorbable PEEK materials.
Reference
1. Arthrex, Inc. CC1-00019-EN_E. Naples, FL; 2018.
2. Arthrex, Inc. LA0218A. Naples, FL; 2010.

BioComposite Labral SwiveLock Anchor, 3.5 mm x 15.8 mm

AR-2325BCC

Related Pages

Shoulder

Labral SwiveLock^® Anchor

Product

Knee

Trochleoplasty

Product

Shoulder

HAGL and RHAGL Lesion Repair

Procedure

Shoulder

SwiveLock® Instability Technique - Anterior

Procedure

Shoulder

SwiveLock® Instability Technique - Posterior

Procedure

Shoulder

SwiveLock^® C Anchor

Product

BioComposite Labral SwiveLock Anchor, 3.5 mm x 15.8 mm

AR-2325BCC

Related Pages

Shoulder

Labral SwiveLock® Anchor

Product

Knee

Trochleoplasty

Product

Shoulder

HAGL and RHAGL Lesion Repair

Procedure

Shoulder

SwiveLock® Instability Technique - Anterior

Procedure

Shoulder

SwiveLock® Instability Technique - Posterior

Procedure

Shoulder

SwiveLock® C Anchor

Product

Labral SwiveLock^® Anchor

SwiveLock^® C Anchor