TightRope II RT, with FiberTape for InternalBrace Technique

TightRope II-RT, Rekonstruktion mit InternalBrace-Augmentations- Bandnaht

TightRope II RT, Reconstruction with InternalBrace Ligament Augmentation Repair

Finished Product

AR-1588RT-IB

Orthobiologics

Procedure

Harnessing the power of biologics to provide all necessary components of healing, the BioACL technique uses the patient’s own bone collected using the GraftNet™ device and mixed with autologous bioactive fluid. Using the Angel® system or Arthrex ACP® double-syringe system, concentrated platelet-rich plasma (cPRP) is obtained from bone marrow aspirate (BMA) or whole blood. The autologous mixture is then delivered into the bone tunnels created during ACL reconstruction. In conjunction with the GraftLink® technique, this provides the ultimate anatomic, minimally invasive, and reproducible approach for biologically augmented ACL reconstructions.

BioACL™ Technique

Child (D)

Knee

Ruptures of the quadriceps and patellar tendons are common in elite and recreational athletes. Most surgeons treat these injuries surgically to lessen the risk of long-term disability and morbidity. Historically, open techniques have been used for rupture repairs, but these techniques may be complicated by wound-healing issues and infection. The minimally invasive Percutaneous Achilles Repair System (PARS) technique can be used to treat quadriceps, patellar, and Achilles tendon ruptures.

Patellar Tendon Repair

Arthrex offers a comprehensive selection of soft-tissue fixation devices for a variety of techniques. Innovative designs and cutting-edge materials allow surgeons to achieve strong, less invasive anatomic ACL reconstructions with soft-tissue grafts.

ACL Soft-Tissue Graft Fixation

Product

As the first adjustable-loop cortical suspensory fixation implant to use a flat SutureTape design, the ACL TightRope II implant offers better handling characteristics and is more resistant to graft abrasion or tissue pull-through than traditional round sutures.1&nbsp;
Engineered for precise graft tensioning, the adjustable-loop mechanism allows for incremental retensioning of the graft construct after the implants have been secured on the cortex. The redesigned cortical button now incorporates a proprietary knotless fifth locking mechanism, increasing strength and resistance to cyclic displacement.2 To accommodate various graft types and techniques, TightRope II implants are available in RT and BTB configurations loaded with an additional flipping suture or preloaded with a FiberTape® suture for the InternalBrace™ technique. Available options for the ABS implant include standard or open.
References
1. Arthrex, Inc. LA1-00038-EN_B. Naples, FL; 2017.
2. Arthrex, Inc. Data on file (APT-G01155). Munich, Germany; 2020.
The InternalBrace surgical technique is intended only to augment the primary repair/reconstruction by expanding the area of tissue approximation during the healing period and is not intended as a replacement for the native ligament. The InternalBrace technique is for use during soft tissue-to-bone fixation procedures and is not cleared for bone-to-bone fixation.

ACL TightRope® II Implant

The GraftLink® technique provides the ultimate in anatomic, minimally invasive, and reproducible ACL reconstruction. Used in combination with anatomic guides, the FlipCutter III drill allows independent femoral and tibial "retrodrilling" to create sockets while maintaining the cortices to potentially maximize fixation. ACL TightRope® II implants feature an exclusive flat SutureTape design and a new proprietary fifth locking point used for fixation, making the GraftLink technique the most reproducible ACL reconstruction system available.
 
• Anatomic: Independent tibial and femoral socket preparation with the FlipCutter III reamer and/or low-profile reamers facilitate unconstrained placement of the ACL graft.
• Minimally Invasive: The FlipCutter III reamer is designed to limit soft-tissue dissection and help preserve bone and periosteum during socket preparation.
• Reproducible: The GraftLink technique workstation simplifies graft preparation. The tapered graft and adjustable ACL TightRope buttons facilitate graft passing, fine tuning of graft depth, and graft tensioning from the femoral and tibial sides.

All-Inside ACL Reconstruction / FlipCutter® III Reamer

Once the minimally invasive or open incision is made and proper soft-tissue windows are established, use the fibular, tibial, and/or femoral collateral marking hooks for anatomic precision and osseous measurements when drilling the appropriate reconstruction tunnels. Using the femoral collateral marking hook with the parallel drill guide will increase anatomic femoral drilling efficiency by significantly reducing convergent tunnels and allowing for accurate guide pin placement at multiple incremental distances. During tunnel creation, use the spooned ends of the collateral ligament retractor to retract the neurovascular structures and the collateral ligament rasp to chamfer the aperture of the completed reconstruction tunnels. Then use FiberWire® or FiberStick™ suture to pass the prepared grafts and tension to the desired position prior to graft fixation.

Anatomic Collateral Ligament Reconstruction

Multiple collateral ligament reconstruction techniques, from aperture fixation using the BioComposite SwiveLock® tenodesis system with biocomposite interference screws to suspensory fixation using TightRope® technology, are available.
FiberTak® soft anchors and biocomposite suture anchors, which come preloaded with needles, are part of a comprehensive line of anchor fixation devices supporting primary or hybrid collateral ligament repair and reconstruction techniques.

Collateral Ligament Graft Fixation

The GraftLink technique provides the ultimate in anatomic, minimally invasive, and reproducible ACL reconstruction. Used in combination with anatomic guides, the FlipCutter® III drill allows independent femoral and tibial "retrodrilling" to create sockets while maintaining the cortices to maximize fixation. Femoral and tibial TightRope® II implants, with a proprietary 5-point locking system, make the GraftLink technique the most reproducible ACL reconstruction available.
<ul>
 <li>Anatomic:&nbsp;Independent tibial and femoral socket preparation with FlipCutter III reamer and/or low-profile reamers facilitate unconstrained placement of the ACL graft.</li>
 <li>Minimally Invasive:&nbsp;Socket preparation with the FlipCutter III reamer limits soft-tissue dissection and helps preserve bone and periosteum.&nbsp;</li>
 <li>Reproducible:&nbsp;The GraftPro® graft prep system simplifies graft preparation; the tapered graft and adjustable ACL TightRope II buttons facilitate graft passing, fine tuning of graft depth, and graft tensioning from the femoral and tibial sides.</li>
</ul>

GraftLink® Technique

Arthroscopic-assisted surgical reconstruction of the PCL using the FlipCutter® drill with RetroConstruction™ technology allows for more anatomic placement and safer drilling in the posterior aspect of the knee. Anterograde drilling can also be performed using low-profile reamers in a far lateral portal to avoid iatrogenic injury. Allograft fixation is accomplished with biocomposite, PEEK, or titanium interference screws. Either a single- or double-bundle allograft reconstruction can be performed using these techniques. Some surgeons may elect to use backup, extracortical fixation.

PCL Soft-Tissue Graft Fixation

The next evolution in adjustable cortical suspensory fixation, the ACL TightRope II implant includes a flat-tape TightRope loop for improved graft interface and handling characteristics during graft tensioning and greater resistance to graft abrasion.1 Engineered to enable precise graft tensioning and incremental retensioning of the construct after cortical button fixation, this implant features a proprietary 5-point locking design that resists cyclic displacement and offers excellent pull-out strength.2
 
 
An ideal choice for all inside ACL reconstruction, the ACL TightRope II RT implant can be used for femoral fixation and combined with an ACL TightRope II ABS implant and concave ABS button for tibial fixation to facilitate incremental graft advancement and tensioning of both the femoral and tibial ends of the graft.
References
1. Arthrex, Inc. Data on file (LA1-00038-EN_B). Naples, FL; 2017.
2. Arthrex, Inc. Data on file (APT-G01155). Munich, Germany; 2020.

TightRope II RT, with FiberTape for InternalBrace Technique

AR-1588RT-IB

Add to Cart

Related Pages

Orthobiologics

BioACL™ Technique

Procedure

Knee

Patellar Tendon Repair

Procedure

Knee

ACL Soft-Tissue Graft Fixation

Procedure

Knee

ACL TightRope® II Implant

Product

Knee

All-Inside ACL Reconstruction / FlipCutter^® III Reamer

Procedure

Knee

Anatomic Collateral Ligament Reconstruction

Procedure

Knee

Collateral Ligament Graft Fixation

Procedure

Knee

GraftLink^® Technique

Procedure

Knee

PCL Soft-Tissue Graft Fixation

Procedure

Knee

TightRope® II RT Implant

Product