Name: Antegrade Femoral Nail System Surgical Technique
Uploaded: 2021-08-10T00:00:00Z
Channel: Arthrex
Description: This animation demonstrates the surgical technique for the Antegrade Femoral Nail System.

Trauma Lower Extremities

<p>This animation demonstrates the surgical technique for the Antegrade Femoral Nail System.</p>

Not Hidden

English  - en

video

AN1-000309-en-US | A | Antegrade Femoral Nail System Surgical Technique

Human

A general overview including the relevant steps of an Arthrex surgical technique. These animations always include a voice-over explaining the process.

Eine allgemeine Übersicht, einschließlich der relevanten Schritte einer Arthrex Operationsanleitung. Diese Animationen enthalten immer Voice-Overs, die den Prozess erklären.

Operationstechnik-Animationen

Surgical Technique Animations

Visão geral incluindo as etapas relevantes de uma técnica cirúrgica Arthrex. Essas animações sempre incluem uma narração explicando o processo.

Animações de técnicas cirúrgicas

Descripción general que incluye los pasos relevantes de una técnica quirúrgica de Arthrex. Estas animaciones siempre incluyen una voz en off que explica el proceso.

Animaciones de técnicas quirúrgicas

Antegrade Femoral Nail System Surgical Technique

Determine the entry point for the nail at the tip of the greater trochanter. This point may vary slightly depending on the patient anatomy and fracture pattern. Insert the 3.2mm guide. Pin through the soft tissue Protector by aiming towards the central axis of the femoral shaft. Remove the black pin guide and remove the guide pin with a 13.5mm cannulated entry reamer. The depth is determined by the first indentation of the reamer lining up with the top of the soft tissue. Protector. The 3.2mm guide pin is removed, as well as the soft tissue Protector, and the 3.0mm ball nose guide wire is introduced down the shaft of the femur. Using the guide wire gripper, measure the length of the ball nose guide wire with the guide wire depth gauge from the laser etch line to determine the nail length. The eight millimeter n cutting reamer is used to remount the central path for the nail. Progressively ream in diameter until cortical chatter is achieved. Ream 1 to 1.5 millimeter over desired nail diameter. Introduce the nail into the femur over the ball. Nose. Guidewire. Complete the insertion with gentle mallet strikes on the targeting guide. Impactor pad. Remove the ball nose guidewire and slide the screw sheath. Four millimeter drill guide and four millimeter obturator assembly through the appropriate transverse hole in the in the targeting guide until it contacts with the lateral cortex of the bone. Remove the obturator and drill the bone using the four millimeter calibrated drill. Measure the screw length from the end of the drill guide using the calibration marks on the drill. Remove the drill guide sleeve and insert the five millimeter cortical screw assembled on the captured hex driver until the black laser line is flush with the end of the sheath. The sheath is removed and the reassembled screw sheath, pin, guide, and obturator assembly is slid through the distal hole on the targeting guide. Remove the obturator and insert the 3.2mm guide. Pin through the guide and into the femoral head. Use the laser marking on the guide pin by sliding the guide pin depth gauge over the guide pin and reading the required screw length. Remove the pin guide and drill using the 5.5mm. Calibrated cannulated. Drill over the guide pin to the appropriate depth by using the calibration marks on the drill. Remove the guide pin and insert the 6.5mm fully threaded cancellous screw assembled on the captured hex driver until the black laser line on the driver is flush with the end of the sheath. Once the screw is fully inserted, remove the screw sheath. Slide the screw sheath purple, yellow, blue 5.5mm. Drill and obturator assembly through the proximal hole in the targeting guide. Drill to the appropriate depth using the calibration marks on the drill. Insert the 6.5mm fully threaded cortical locking screw assembled with the captured hex driver through the screw sleeve until the laser mark is flush with the end of the sleeve. Remove the screw sleeve. Finally, use the ball hex driver to uncouple and remove the targeting arm from the nail. Using a perfect circle technique. Drill bicortical through the distal femur with the short four millimeter drill bit. Measure the screw length using the green line on the drill bit referenced off the distal depth gauge. Insert a distal five millimeter cortical screw using the hex driver to complete the nail fixation.

Antegrade Femoral Nail System Surgical Technique

Related Pages

Trauma Lower Extremities

Sistema de unhas femoral

Product

Trauma Upper Extremities

Sistema de haste femoral anterógrada

Procedure

Trauma Lower Extremities

Sistema de unhas femoral

Product