Name: AutoPose™ Adipose Processing System
Uploaded: 2020-12-07T00:00:00Z
Channel: Arthrex
Description: Arthrex presents the AutoPose ™ Adipose processing system.

Orthobiologics

<p>Arthrex presents the AutoPose<sup>™</sup> Adipose processing system.</p>

Not Hidden

English  - en

video

AN1-000233-en-US | A | AutoPose™ Adipose Processing System

Human

Animations demonstrating the features and benefits of a specific product.

Animationen, die die Funktionen und Vorteile eines bestimmten Produkts demonstrieren.

Produktdemonstrationen

Product Demonstrations (Videos & Animations)

Animações demonstrando os recursos e benefícios de um produto específico.

Vídeos de demonstração de produtos

Animaciones que demuestran las características y beneficios de un producto específico.

Videos de demostración de productos

Product Demonstrations

AutoPose™ Adipose Processing System

The Arthrex AutoPose processing system includes the single use sterile access device featuring a 12 gauge piercing needle for accessing tissue tubing, and filter for connecting with a vacuum source. A vacuum regulator and a 90 cc main cavity to lift and immobilize the target site for lipo aspiration. The access device is compatible with AutoPose restore syringe that is supplied with a 14 gauge cannula that is used for harvesting and processing of lipo aspirate. The movable arm of the access device has a 20 degree articulation, allowing for the harvesting of tissue in a fan like pattern. The AutoPose processing system also includes the single use sterile Arthrex restore syringe, a dual syringe device. A 14 gauge multi-port cannula attaches to the restore syringe using Luer Lock Hub. The 50 cc primary syringe chamber features a built in vacuum lock that is used to charge the syringe for lipo aspiration. Contained within the 50 cc processing syringe is a 30 cc inner syringe along with a filter mechanism. The AutoPose syringe stand holds the AutoPose restore syringe during sample processing steps and can hold up to four additional injected syringes. Sites commonly used for adipose tissue harvest are the anterolateral flank, lateral thigh, and abdomen. To facilitate lipo aspiration using AutoPose access. Autopose access is placed on harvest site that has been anesthetized and appropriately cleaned. A vacuum is applied to lift and immobilize the tissue. The dermis is lifted to ensure the 12 gauge piercing needle will access adipose tissue at a depth of one centimeter below the skin surface, thereby avoiding deeper tissue features such as muscle and peritoneum. The piercing needle is pushed forward to create an opening into which the supplied 14 gauge multi-port cannula is introduced to infiltrate the tissue harvest site with tumescent fluid containing a mixture of epinephrine, lidocaine, and saline. A volume of tumescent fluid equivalent to the anticipated tissue harvest volume is used. Once the tumescent fluid has been delivered using a fan like pattern, the cannula is removed and the tissue is allowed to rest for 5 to 10 minutes. The AutoPose restores syringe. Cannula is then introduced into the tissue, and the syringe barrel is pulled back until secured by the AutoPose. Restore syringe. Vacuum lock adipose tissue comprising small blood vessels, extracellular matrix adipocytes, as well as regenerative and immune cell populations, is harvested using a deliberate back and forth motion. Harvesting in a fan like motion also should be performed to mitigate risk of creating contour irregularities. Several passes may be required depending on the volume of lipo aspirate that is needed. Once the desired volume of lipo aspirate is obtained, the AutoPose restore syringe should be capped. Placed in the AutoPose restore syringe stand and allow to decant for five minutes to allow the aqueous and adipose phases to separate the lower aqueous phase containing red blood cells. Tumescent fluid and cell debris is expressed from the syringe into an appropriate waste container. 15 cc of saline solution is introduced into the AutoPose restore syringe. The syringe is capped and briefly agitated to completely mix. It's then placed back into the AutoPose syringe stand and allowed to decant. After a three minute incubation, the bottom Newton solution is again expelled into an appropriate waste container. The wash step is performed again for a total of two washes. Following the second wash, stem pressure is applied to the collar of the inner syringe barrel. The washed lipo aspirate will travel through the filter mechanism into the 30 cc inner syringe. The inner syringe containing the resized adipose tissue can be unscrewed from the resizing mechanism and capped until ready for use. The resized adipose tissue is suitable for injection using 21 gauge needle.

AutoPose™ Adipose Processing System

Related Pages

Sistema de extração de tecido adiposo Arthrex AutoPose™