Schraubendreheraufsatz, Torx 10 (=2.74mm)

Finished Product

AR-8944DH

3.0 mm Titanium VAL KreuLock Compression Screw System

3.0 mm Hybrid Titanium VAL KreuLock Compression Screw System

Low Profile Hohmann Retractor, 8.0 mm x 16 cm

Cup Curette, Straight Shaft, 100 mm Long

Löffelkürette, gerader Schaft, 100 mm lang

Cureta con punta caliciforme, vástago recto, 100 mm

Cureta com colher, haste reta, 100 mm de comprimento

Screw Holding Forceps, Self-Retaining

Haltenzange für Low Profile Kortikalisschrauben

Pinzas de sujeción de tornillo con autorretención

Kanülierter Senkbohrer, 4.0 mm, für AR-8804C-xx und AR-8840CL-xx

Screw Holding Sleeve for 2.7, 3.5 and 4 mm Screws

Applikationshülse für 2.7,3.5 und 4.0 mm Schrauben

Holding Sleeve for 2.7, 3.5 and 4.0 mm Screws

Dispositivo de soporte para tornillos de Ø 2.7, 3.5 y 4 mm

Manga de suporte para parafusos de 2.7 mm, 3.5 mm e 4 mm

Tiefenmesser für ( 2.7) / 3.5 / 4.0 mm, Low Profile Schraube AR-8835-xx;AR-8840-10

Depth Device, 2.7 / 3.5 / 4.0 mm, Low Profile

Dispositivo de medición de profundidad, Ø 2.7 mm/3.5 mm/4 mm, bajo perfil

Dispositivo de profundidade, 2.7 mm/3.5 mm/4 mm, baixo perfil

2.7 mm Locking Drill Guide, qty. 2

Bohrhülse / Tiefenmesser für 2.7 mm Low Profile Schrauben, winkelstabil,AR-8827L-xx

Drill Guide, Threaded, Low Profile, 2.7 mm

Guía de perforación, roscada, bajo perfil, Ø 2.7 mm

Guia de perfuração, roscado, baixo perfil, 2.7 mm

Periosteal Elevator, 6 mm, Curved Blade

3.5 mm Locking Drill Guide, qty. 2

Bohrhülse/Tiefenmesser, für Schrauben 3.5 mm

Guía de perforación, Ø 3.5 mm, bloqueo

Ratschenschraubendreherhandgriff, AO-Anschluss, Quick Connect

T15 Selbsthaltender Schraubendreheraufsatz

Drive Shaft, Cannulated, QC, T15 Hexalobe

Schraubendreheraufsatz, kanüliert, QuickLock, T15 Hexalobe

Drive Shaft, Cannulated, QC, T15 Hexalobe

Vástago de destornillador, canulado, conexión rápida, Torx T15

Haste de chave, canulada, QC, T15 hexagonal

Arthrex Ankle Fracture System Instrument Set

Fio Reabsorvivel, com ponta metálica TRIM-IT, 2.4 mm

Dispositivo de profundidade, 3 mm, canulado

Driver Shaft, T10 Hexalobe, Cannulated

Schraubendreheraufsatz, kanüliert, Torx 10

Vástago de destornillador Torx T10, canulado

Senkbohrer, kanüliert, für 3.0 mm Schrauben

Schraubendreheraufsatz, Hexalobe, T8, selbsthaltend

Insertador, hexalobular T8, con autorretención

Holding Sleeve for 2.0 and 2.4 mm Screws

Applikationshülse für 2.0 und 2.4 mm Schrauben

Dispositivo de soporte para tornillos de Ø 2 y 2.4 mm

Manga de suporte para parafusos de 2 mm e 2.4 mm

HOLDING SLEEVE, FOR 2.0 &amp; 2.4MM SCREWS

2.0 mm Drive Shaft for QuickFix Screw System

Schraubendreheraufsatz, 2.0 mm für QuickFix Screw System

2.0 mm Drive Shaft for QuickFix Screw System

Vástago de destornillador de Ø 2 mm para sistema de tornillos QuickFix

Chave 2 mm para sistema de parafusos QuickFix

1.3 mm Drill Bit for 2.0 mm QuickFix Screw

Bohrer, 1.3 mm für 2.0 mm QuickFix Screw

1.3 mm Drill Bit for 2.0 mm QuickFix Screw

Broca de Ø 1.3 mm para tornillo QuickFix de Ø 2 mm

Ponta de broca 1.3 mm para QuickFix Screw 2 mm

Depth Guide for 3.0 mm QuickFix Screw

Arthrex QuickFix Depth Guide for 3.0 mm Screw

Guía de profundidad para tornillo QuickFix de Ø 3 mm

Guia de profundidade para parafuso QuickFix 3 mm

Cortatornillos, tornillo QuickFix, Ø 2 mm

3.0 mm Drive Shaft for QuickFix Screw System

Schraubendreheraufsatz, 3.0 mm für QuickFix Screw System

3.0 mm Drive Shaft for QuickFix Screw System

Vástago de destornillador de Ø 3 mm para sistema de tornillos QuickFix

Chave de 3 mm para sistema de parafusos QuickFix

Cortatornillos, tornillo QuickFix, Ø 3 mm

Kanülierter Bohrer, 2.0 mm für AR-8933-xxPT (AO Anschluß)

Bohrhülse, 1.1 / 2.0 mm, für AR-8933-xxPT

Holding Sleeve for 2.7 and 3.0 mm Screws

Applikationshülse für 2.7 und 3.0 mm Schrauben

Dispositivo de soporte para tornillos de Ø 2.7 y 3 mm

Manga de suporte para parafusos de 2.7 mm e 3 mm

HOLDING SLEEVE, FOR 2.7 &amp; 3.0MM SCREWS

Rundfräse, metatarsal, für MTP Platte, 16.0 mm

Rundfräse, metatarsal, für MTP Platte, 18.0 mm

Rundfräse, metatarsal, für MTP Platte, 20.0 mm

Rundfräse, metatarsal, für MTP Platte, 22.0 mm

Fräse, metatarsal, für MTP Platte, 14.0 mm

Fräse, metatarsal, für MTP Platte, 16.0 mm

Fräse, metatarsal, für MTP Platte, 18.0 mm

Fräse, metatarsal, für MTP Platte, 20.0 mm

Fräse, metatarsal, für MTP Platte, 22.0 mm

Fräse, phalangeal, für MTP Platte, 14.0 mm

Fräse, phalangeal, für MTP Platte, 16.0 mm

Fräse, phalangeal, für MTP Platte, 18.0 mm

Fräse, phalangeal, für MTP Platte, 20.0 mm

Fräse, phalangeal, für MTP Platte, 22.0 mm

Locking Drill Guide, 2.4 mm, qty. 2

Bohrhülse / Tiefenmesser für 2.4 mm winkelstabile Schrauben

Guía de perforación/medición de profundidad, con fijación, Ø 2.4 mm

Guia de perfuração/profundidade, bloqueio, 2.4 mm

Locking Drill Guide, 3.0 mm, qty. 2

Bohrhülse / Tiefenmesser für 3.0mm winkelstabile Schrauben

Guía de perforación, con fijación, roscada, Ø 3 mm

Guia de perfuração, bloqueio, roscado, 3 mm

Guía para doblar, con fijación, Ø 2.4 mm

Guía para doblar, con fijación, Ø 3 mm

Comprehensive Foot Set 2.4/3.0 mm Instrument Case

Caja de instrumental para juego completo de pie con tornillos de Ø 2.4 mm/3 mm

Caixa de instrumental de conjunto completo para pé 2.4 mm/3 mm

Bohrhülse für variabel winkelstabile Schrauben, 2.4mm

Guía de perforación, bloqueo en ángulo variable, Ø 2.4 mm

Bohrhülse für variabel winkelstabile Schrauben, 3.0mm

Guía de perforación, bloqueo en ángulo variable, Ø 3 mm

2.4 mm VAL Locking Drill Guide, qty. 2

Bohrhülse für vari.winkelstabile Schrauben, 2.4mm, m Gewinde

Guía de perforación, bloqueo en ángulo variable, bloqueo, Ø 2.4 mm

Guia de perfuração com bloqueio 2.4mm, VAL

3.0 mm VAL Locking Drill Guide, qty. 2

Bohrhülse für vari.winkelstabile Schrauben, 3.0mm, m Gewinde

Guía de perforación, bloqueo en ángulo variable, bloqueo, Ø 3 mm

Comprehensive Fixation Set, 2.4/3.0 mm

2.4/3.0 mm Comprehensive Modular Foot Set

2.7 mm SS KreuLock Compression Screw Caddy

2.7 mm SS KreuLock Compression Screw System

Foot and Ankle

Product

The KreuLock locking compression screws combine the same proven technology found in our Headless Compression FT screws with a locking screw head to provide compression along the screw for treatment of fractures or fusions. Additionally, they are designed to bring the plate to bone.
<ul>
 <li>Variable-Stepped Thread Pitch – the screw tip’s wider thread pitch enters the bone faster than trailing threads, gradually compressing the fragments as the screw is advanced</li>
 <li>Locking Head – mates with existing plates</li>
 <li>Individual screw and instrument modules for each screw family</li>
 <li>Available in both titanium and stainless steel</li>
</ul>

KreuLock™ Locking Compression Screws

Child (D)

More than a plate, this is a complete system for joint preparation and fixation for the treatment of severe hallux rigidus and other MTP pathologies. Whether used in primary or revision cases, this system enables surgeons to reduce, compress, and lock the 1st metatarsal phalangeal joint in the ideal position for arthrodesis. Features &amp; Benefits:
<ul>
 <li>Anatomic Plate Design - 1.5 mm titanium plate is anatomically designed with 8 degrees of dorsiflexion and 5 degrees of valgus</li>
 <li>Concave, Convex Reamers - Facilitate quick and accurate joint preparation</li>
 <li>3 mm Variable-Angle Locking Screws - With a 30-degree cone of variability</li>
</ul>

Low Profile MTP Plates andScrews

Trauma Lower Extremities

To address various types of fractures, the Patella SuturePlate™ II system offers three types of plates in different sizes. All plates are made of titanium and have a low-profile thickness of 1.6 mm with screws sitting flush on the plate. Suture holes in the plate can be optionally used for soft-tissue reattachment or ligament bracing.

Patella SuturePlate™ II

The Ankle Fracture Management System was developed to be the most comprehensive set available for the treatment of ankle fractures. All fibula plates are engineered to work seamlessly with our proven Syndesmosis TightRope® implants.
The set includes:
<ul>
 <li>3.5 mm locking one-third tubular plates</li>
 <li>3.5 mm locking straight plates (reconstruction plates)</li>
 <li>Fracture-specific plates: locking medial hook plates, locking lateral hook plates, and anatomic distal fibular plates</li>
</ul>
The system can also be customized to include the FibuLock® fibular nail (an MIS solution for ankle fractures), posterolateral fibula plates, and/or 2.7 mm cortical screws depending on the surgeon’s preferences.

Ankle Fracture Management System

Low Profile Locking Screw, SS, 2.7 x 20 mm

Winkelstabile Schraube, Stahl, 2.7 mm x 20 mm

Low Profile Locking Screw, SS, 2.7 x 20 mm

Low Profile Locking Screw, acero inoxidable, Ø 2.7 mm x 20 mm

Parafuso de bloqueio de baixo perfil, aço inoxidável, 2.7 mm x 20 mm

Low Profile Locking Screw, SS, 2.7 x 22 mm

Winkelstabile Schraube, Stahl, 2.7 mm x 22 mm

Low Profile Locking Screw, SS, 2.7 x 22 mm

Low Profile Locking Screw, acero inoxidable, Ø 2.7 mm x 22 mm

Parafuso de bloqueio de baixo perfil, aço inoxidável, 2.7 mm x 22 mm

Low Profile Locking Screw, SS, 2.7 x 24 mm

Winkelstabile Schraube, Stahl, 2.7 mm x 24 mm

Low Profile Locking Screw, SS, 2.7 x 24 mm

Low Profile Locking Screw, acero inoxidable, Ø 2.7 mm x 24 mm

Parafuso de bloqueio de baixo perfil, aço inoxidável, 2.7 mm x 24 mm

Low Profile Locking Screw, SS 2.7 x 26 mm

Winkelstabile Schraube, Stahl, 2.7 mm x 26 mm

Low Profile Locking Screw, SS, 2.7 x 26 mm

Low Profile Locking Screw, acero inoxidable, Ø 2.7 mm x 26 mm

Parafuso de bloqueio de baixo perfil, aço inoxidável, 2.7 mm x 26 mm

Low Profile Locking Screw, SS 2.7 x 28 mm

Winkelstabile Schraube, Stahl, 2.7 mm x 28 mm

Low Profile Locking Screw, SS, 2.7 x 28 mm

Low Profile Locking Screw, acero inoxidable, Ø 2.7 mm x 28 mm

Parafuso de bloqueio de baixo perfil, aço inoxidável, 2.7 mm x 28 mm

Low Profile Locking Screw, SS 2.7 x 30 mm

Winkelstabile Schraube, Stahl, 2.7 mm x 30 mm

Low Profile Locking Screw, SS, 2.7 x 30 mm

Low Profile Locking Screw, acero inoxidable, Ø 2.7 mm x 30 mm

Parafuso de bloqueio de baixo perfil, aço inoxidável, 2.7 mm x 30 mm

Low Profile Nonlocking Screw, SS, 3 x 10 mm, Cancellous

Spongiosaschraube, Vollgewinde, Stahl, 3 x 10 mm, unsteril, IM

Cancellous Screw, Fully Threaded, SS, 3 x 10 mm

Tornillo para hueso esponjoso, con rosca completa, acero inoxidable, Ø 3mm x 10 mm

Parafuso para osso esponjoso, com rosca completa, aço inoxidável, 3 mm x10 mm

Low Profile Nonlocking Screw, SS, 3 x 12 mm, Cancellous

Spongiosaschraube, Vollgewinde, Stahl, 3 x 12 mm, unsteril, IM

Cancellous Screw, Fully Threaded, SS, 3 x 12 mm

Tornillo para hueso esponjoso, con rosca completa, acero inoxidable, Ø 3mm x 12 mm

Parafuso para osso esponjoso, com rosca completa, aço inoxidável, 3 mm x12 mm

Low Profile Nonlocking Screw, SS, 3 x 14 mm, Cancellous

Spongiosaschraube, Vollgewinde, Stahl, 3 x 14 mm, unsteril, IM

Cancellous Screw, Fully Threaded, SS, 3 x 14 mm

Tornillo para hueso esponjoso, con rosca completa, acero inoxidable, Ø 3mm x 14 mm

Parafuso para osso esponjoso, com rosca completa, aço inoxidável, 3 mm x14 mm

Low Profile Nonlocking Screw, SS, 3 x 16 mm, Cancellous

Spongiosaschraube, Vollgewinde, Stahl, 3 x 16 mm unsteril, IM

Cancellous Screw, Fully Threaded, SS, 3 x 16 mm

Tornillo para hueso esponjoso, con rosca completa, acero inoxidable, Ø 3mm x 16 mm

Parafuso para osso esponjoso, com rosca completa, aço inoxidável, 3 mm x16 mm

Low Profile Nonlocking Screw, SS, 3 x 18 mm, Cancellous

Spongiosaschraube, Vollgewinde, Stahl, 3 x 18 mm unsteril, IM

Cancellous Screw, Fully Threaded, SS, 3 x 18 mm

Tornillo para hueso esponjoso, con rosca completa, acero inoxidable, Ø 3mm x 18 mm

Parafuso para osso esponjoso, com rosca completa, aço inoxidável, 3 mm x18 mm

Low Profile Nonlocking Screw, SS, 3 x 20 mm, Cancellous

Spongiosaschraube, Vollgewinde, Stahl, 3 x 20 mm unsteril, IM

Cancellous Screw, Fully Threaded, SS, 3 x 20 mm

Tornillo para hueso esponjoso, con rosca completa, acero inoxidable, Ø 3mm x 20 mm

Parafuso para osso esponjoso, com rosca completa, aço inoxidável, 3 mm x20 mm

Low Profile Nonlocking Screw, SS, 3 x 22 mm, Cancellous

Spongiosaschraube, Vollgewinde, Stahl, 3 x 22 mm unsteril, IM

Cancellous Screw, Fully Threaded, SS, 3 x 22 mm

Tornillo para hueso esponjoso, con rosca completa, acero inoxidable, Ø 3mm x 22 mm

Parafuso para osso esponjoso, com rosca completa, aço inoxidável, 3 mm x22 mm

Low Profile Nonlocking Screw, SS, 3 x 24 mm, Cancellous

Spongiosaschraube, Vollgewinde, Stahl, 3 x 24 mm unsteril, IM

Cancellous Screw, Fully Threaded, SS, 3 x 24 mm

Tornillo para hueso esponjoso, con rosca completa, acero inoxidable, Ø 3mm x 24 mm

Parafuso para osso esponjoso, com rosca completa, aço inoxidável, 3 mm x24 mm

T10 Driver, Solid, qty. 2

AR-8944DH

Add to Cart

AR-8944DH is a Set Item Of (6)

AR-8944DH is a Set Item Of (6)

AR-8950S

AR-8933VCLS

AR-8933HVCLS

AR-8943S

AR-8950S-01

AR-8827CLS

Related Pages

Foot and Ankle

KreuLock™ Locking Compression Screws

Product

Foot and Ankle

Low Profile MTP Plates and Screws

Product

Trauma Lower Extremities

Patella SuturePlate™ II

Product

Foot and Ankle

Ankle Fracture Management System

Product

Foot and Ankle

Comprehensive Fixation System

Product

Foot and Ankle

Internal Fixation for Distal Tibia Fracture/Pilon

Procedure

Foot and Ankle

Internal Fixation of Ankle Fractures

Procedure

Foot and Ankle

MaxForce™ MTP Plates

Product

Foot and Ankle

MTP Joint Arthrodesis

Procedure

Foot and Ankle

Lisfranc Arthrodesis

Procedure

Foot and Ankle

Midfoot Plating Module

Product