PassPort Button Cannula, 8 mm ID x 2 cm, qty 5

Arthrex PassPort Button Cannula, 8.0 mm I.D. x 2.0 cm, steril, SU

Arthrex PassPort Button Cannula, 8 mm x 2 cm

PassPort Button Cannula de Arthrex de Ø 8 mm x 2 cm

Finished Product

AR-6592-08-20

Shoulder

Product

The PassPort Button cannula helps maximize visibility and maneuverability inside and outside of the arthroscopic workspace. The double-dam, one-piece molded design has low-profile flanges that seat flush to the skin and soft tissue. These flanges create a stable portal that allows instruments to be inserted and removed without the concern of cannula loss. These cannulas can be easily introduced into the portal through the PassPort Button cannula inserter or with a curved hemostat.
Each cannula is supplied with a 5 mm spacer to ensure the accurate length is used. The PassPort Button cannula with auxiliary lumen adds a convenient side channel for using the NanoScope™ system and other instruments, or for managing sutures. The PassPort Divider also aids in suture management by creating divided channels in the 12 mm cannula.

PassPort Button™ Cannula

Child (D)

Elbow

Knee

The PassPort Button™ Cannula help maximize visibility and maneuverability inside and outside of the arthroscopic work space. The double-dam one-piece molded design has low-profile flanges that seat flush to the skin and soft tissue. These flanges create a stable portal that allows instruments to be inserted and removed, without the concern of cannula loss.

The PassPort Button™ Cannula is manufactured from soft and flexible silicone material that will conform to smaller portal incisions and protect soft tissue and cartilage while maximizing visibility and maneuverability inside and outside of the arthroscopic work space. The double-dam one-piece molded design has low profile flanges that seat flush to the skin and soft tissue. These flanges create a stable portal that allows instruments to be inserted and removed, without the concern of cannula loss. They are easily introduced by grasping the inside flange with a curved hemostat and inserting into the incision.

Procedure

There has been a renewed interest in ACL primary repairs as the treatment for Sherman Type I and Type II ACL ruptures. Careful analysis of historical data has revealed that certain ACL tear subgroups, especially proximal tears with good tissue quality, have positive clinical outcomes with primary ACL repair.1
Studies reporting outcomes of remnant-preserving ACL surgeries have shown encouraging results and a greater potential for early healing and better functional outcomes compared with remnant-resecting surgeries.2 Preservation of the native ACL using the primary repair technique can achieve short-term clinical success and result in good clinical outcomes at 3-year follow-up in this carefully selected patient population.3
Arthroscopic primary repair is minimally invasive in that no grafts need to be harvested, no tunnels need to be drilled, and revision surgery, if necessary, is more analogous to primary reconstructions.4 The goal of the procedure is to preserve the remnant native ligament. By doing this, the native nerve endings and blood supply are preserved.5
References
1. van der List JP, DiFelice GS. Role of tear location on outcomes of open primary repair of the anterior cruciate ligament: a systematic review of historical studies. Knee. 2017;24(5):898-908. doi:10.1016/j.knee.2017.05.009
2. van der List JP, DiFelice GS. Successful arthroscopic primary repair of a chronic anterior cruciate ligament tear 11 years following injury. HSS J. 2017;13(1):90-95. doi:10.1007/s11420-016-9530-8
3. Jonkergouw A, van der List JP, DiFelice GS. Arthroscopic primary repair of proximal anterior cruciate ligament tears: outcomes of the first 56 consecutive patients and the role of additional internal bracing. Knee Surg Sports Traumatol Arthrosc. 2019;27(1):21-28. doi:10.1007/s00167-018-5338-z
4. DiFelice GS, Villegas C, Taylor S. Anterior cruciate ligament preservation: early results of a novel arthroscopic technique for suture anchor primary anterior cruciate ligament repair. Arthroscopy. 2015;31(11):2162-2171. doi:10.1016/j.arthro.2015.08.010
5. DiFelice GS, van der List JP. Arthroscopic primary repair of proximal anterior cruciate ligament tears. Arthrosc Tech. 2016;5(5):e1057-e1061. doi:10.1016/j.eats.2016.05.009

ACL Repair

An innovative approach to ACL preservation, the ACL Repair TightRope implant allows precise, incremental repair tensioning and retensioning. Additionally, the new FiberRing suture allows for simplified and reproducible suture passing and implant loading. Careful analysis of historical data has revealed that certain ACL tear subgroups, especially proximal tears with good tissue quality, have positive clinical outcomes with primary ACL repair.1
Reference
1. Arthrex, Inc. DOC1-000178-en-US_B. Naples, FL; 2020.

ACL Repair TightRope® Implant With FiberRing™ Sutures

The Knee Obturator has been specially designed to simplify the location and creation of posterior knee portals as well as introduction of a working cannula. Posterior portals are often necessary for several common procedures such as; loose body removal, PCL reconstruction, meniscal root avulsion repair, and popliteal cyst debridement. Current “outside-in” techniques can be time consuming and put posterior structures at risk of damage with sharp spinal needles and scalpels. The Knee Obturator lets surgeons quickly create the portal from the inside-out. The unique curvature fits around the cruciate ligaments and around the back of the femoral condyles. The tapered eyelet tip facilitates insertion of a PassPort Button Cannula with a traction suture or acts as a switching stick for cannula insertion.

Knee Obturator for Posterior Portals

Pass 0 and 2-0 FiberWire® sutures in tight recesses of the knee with the Knee Scorpion suture passer and retriever. With the lowest profile jaw available (3.2 mm), this one-handed, ergonomically designed suture passer eliminates extra steps for suture shuttling and retrieval with reliable FastPass technology. Pass and capture suture in one simple pass and apply multiple suture configurations with the Knee Scorpion suture passer.

Knee Scorpion™ Suture Passer

Arthrex offers several options for femoral ACL socket creation through the medial portal. Dedicated transportal offset guides and low-profile reamers work together to facilitate visualization and help minimize possible damage to the medial femoral condyle while drilling in the hyperflexed position. The Arthrex Flexible Reamer System reduces the need for knee flexion during socket creation and may allow for longer sockets and better orientation.

Medial Portal Femoral Socket Preparation

The low-profile 3.2 mm Knee Scorpion™ jaw allows the passage of 0 and 2-0 FiberWire® suture in tight recesses of the knee. The one-handed, ergonomically designed suture passer is offered with reliable FastPass technology. FastPass Scorpion™ technology allows passing suture through tissue and capturing the suture in one simple pass, eliminating the need for the extra steps of suture retrieval and suture shuttling. Multiple different suture configurations are possible using the Knee Scorpion suture passer.

Meniscal All-Suture Repair

The SpeedBridge double-row technique is used to repair a rotator cuff tear using a fully threaded SwiveLock® anchor combined with FiberTape® suture to create a quick and secure construct with no knots and only two suture-passing steps. The SpeedBridge double-row technique uses FiberTape suture with three times the contact area compared to a standard #2 FiberWire® suture.1 It provides a broad footprint that can be helpful for repairs to degenerative cuff tissue for which tissue pull-through may be a concern.
Reference
1. Arthrex, Inc. LA0239A. Naples, FL; 2008.
Please note that certain bio (PLLA) anchors and screws are not available for sale in EMEA.

SpeedBridge™ Double-Row Technique

The streamlined PCL ToolBox contains all the necessary instruments for performing a variety of modern PCL reconstruction techniques. The set includes the RetroConstruction™ Drill Guide System with drill sleeves for use with the FlipCutter® reamer, RetroDrill® reamer, and standard 2.4 mm guide pins.
Femoral and tibial RetroConstruction marking hooks allow, reproducible placement of pins and drills into the anatomic footprints. Also included in the set are double-bundle femoral drill guides, curved instruments for tibial preparation, a knee obturator for safe and easy posterior portal placement, the "worm" graft passer, tunnel plugs, drills, screwdrivers, notchers, and other accessories.

PassPort Button Cannula, 8 mm ID x 2 cm, qty 5

AR-6592-08-20

Add to Cart

Related Pages

Shoulder

PassPort Button™ Cannula

Product

Elbow

PassPort Button™ Cannula

Product

Knee

PassPort Button™ Cannula

Product

Hip

PassPort Button™ Cannula

Product

Knee

ACL Repair

Procedure

Knee

ACL Repair TightRope® Implant With FiberRing™ Sutures

Product

Knee

Knee Obturator for Posterior Portals

Product

Knee

Knee Scorpion™ Suture Passer

Product

Knee

Medial Portal Femoral Socket Preparation

Procedure

Knee

Meniscal All-Suture Repair

Procedure

Shoulder

SpeedBridge™ Double-Row Technique

Procedure

Knee

Transtibial PCL Reconstruction

Procedure