Guide Pin with Suture Eye 2.4 x 435 mm

Pullout Pin mit Fadenöse, 2.4 mm x 43.5 cm, steril

Guide Pin with Suture Eye, 2.4 mm x 435 mm, sterile

Aguja guía con ojal de sutura, Ø 2.4 mm x 435 mm, estéril

Fio broca com orifício de sutura, 2.4 mm x 435 mm, estéril

Finished Product

AR-1297LS

Fio broca com orifício de sutura, 2.4 mm

Knee

Procedure

Arthrex offers a comprehensive selection of fixation devices for a variety of bone-patellar tendon-bone (BTB) graft techniques. These options include adjustable, continuous-loop suspensory fixation, and interference screws in a variety of materials. The TightRope® implant, which has been used in 2 million procedures globally,1 was designed to simplify ACL reconstruction and facilitate advanced techniques, such as the GraftLink® technique. BioComposite FastThread™ interference screws, which are composed of time-tested material with more than a decade of clinical success and implantation, allow for faster screw insertion and better graft protection.2
References
1. Arthrex, Inc. Data on file (sales data as of September 18, 2018). Naples, FL; 2018.
2. Arthrex, Inc. LA1-0199-EN_E. Naples, FL; 2018.
Please note that certain bio (PLLA) anchors and screws are not available for sale in EMEA.

ACL BTB Graft Fixation

Child (D)

Replicate the anatomical footprint advantage of outside-in guide pin placement without transosseous tunnels. The ACL RetroConstruction system and FlipCutter III drill enable anatomic drill placement of ACL and PCL sockets or tunnels.
Create minimally invasive inside-out sockets with the FlipCutter III drill, an innovative variable-size, all-in-one guide pin and reamer. The FlipCutter III drill provides a whole new level of freedom in socket positioning and is ideal for hard-to-reach areas such as tibial socket creation for PCLR, anatomic femoral socket creation for ACLR, socket creation for meniscal allograft, meniscal root avulsion repair, and retrograde OATS® procedures of the patella.

ACL RetroConstruction™ System / FlipCutter® III Drill

Drill Tip Guide Pin 3.5 mm x 311 mm

Zieldraht mit Bohrgewinde, 3.5 mm x 311 mm, steril

Aguja guía con punta de broca, Ø 3.5 mm x 311 mm

Product

The ACL ToolBox was designed to fit the needs of modern ACL reconstructions. The streamlined three layer case contains all the reusable instruments needed to complete the majority of common ACL procedures and contains an additional "pin mat" area for customization. The ACL ToolBox now contains the RetroConstruction™ Guide System with commonly used ACL marking hooks such as the footprint guides for femoral ACL drilling. Variable drill sleeves are included for all techniques and can be used with standard 2.4 mm pins, 3.0 mm RetroDrill® Pins and the 3.5 mm FlipCutters®. Everything needed to complete an ACL reconstruction can be found in this case including graft harvesting, notch preparation, tunnel drilling, graft passing and fixation.

ACL ToolBox

Low-profile reamers facilitate femoral socket preparation through the medial portal and also allow greater flexibility in femoral socket placement for transtibial procedures. The reamer's extra thin shaft and “2-flute” design provide a flat profile that easily passes through the portal and avoids damaging the femoral condyle and PCL. The reduced length of the flutes allows the drill to spin without contacting PCL fibers. Low-profile reamers may be used with the Arthrex Transportal ACL Guides for anatomic guide pin placement through the medial portal.

Low Profile Reamers

Arthrex offers several options for femoral ACL socket creation through the medial portal. Dedicated transportal offset guides and low-profile reamers work together to facilitate visualization and help minimize possible damage to the medial femoral condyle while drilling in the hyperflexed position. The Arthrex Flexible Reamer System reduces the need for knee flexion during socket creation and may allow for longer sockets and better orientation.

Medial Portal Femoral Socket Preparation

The streamlined PCL ToolBox contains all the necessary instruments for performing a variety of modern PCL reconstruction techniques. The set includes the RetroConstruction™ Drill Guide System with drill sleeves for use with the FlipCutter® reamer, RetroDrill® reamer, and standard 2.4 mm guide pins.
Femoral and tibial RetroConstruction marking hooks allow, reproducible placement of pins and drills into the anatomic footprints. Also included in the set are double-bundle femoral drill guides, curved instruments for tibial preparation, a knee obturator for safe and easy posterior portal placement, the "worm" graft passer, tunnel plugs, drills, screwdrivers, notchers, and other accessories.

Transtibial PCL Reconstruction

The ACL ToolBox is a comprehensive system that allows surgeons to drill using medial portal, transtibial, or RetroDrill® techniques. Achieve accurate and reproducible tunnel preparation with this set, which contains marking hooks, drill guides, offset reference guides, dilators, and reamers.

Guide Pin with Suture Eye 2.4 x 435 mm

AR-1297LS

Add to Cart

Related Pages

Knee

ACL BTB Graft Fixation

Procedure

Knee

ACL RetroConstruction™ System / FlipCutter^® III Drill

Procedure

Knee

ACL ToolBox

Product

Knee

Low Profile Reamers

Product

Knee

Medial Portal Femoral Socket Preparation

Procedure

Knee

Transtibial PCL Reconstruction

Procedure

Knee

Transtibial™ ACL Reconstruction

Procedure