Mini FiberTape Suture Retriever, with SR Handle

Mini FiberTape-Fadenfänger mit SR-Handgriff

Recuperador Mini FiberTape con mango con trinquete

Mini recuperador FiberTape com punho com roquete

Finished Product

AR-12974SR

Shoulder

Product

The FiberTape® Retriever has a wide jaw specifically designed for easy FiberTape management during a SpeedBridge™ or SpeedFix™ procedure. The roller pin in the upper jaw allows FiberTape to slide freely. The tip is serrated to also allow its use as a grasper to securely grab a suture.
A Mini FiberTape Retriever is also available with the same features except in a smaller scale. The smaller design allows the Mini FiberTape Retriever to fit through the 4.5 mm inner diameter of the 2.9 PushLock® Percutaneous Insertion Kit's metal cannula and the reusable metal cannula. The Mini FiberTape Retriever may be used in labral or rotator cuff repair.

FiberTape® Retriever

Child (D)

Elbow

Knee

Hand instruments for the knee have state-of-the-art quality, durability, a precise tactile feel, and an extremely low-profile tip. These features facilitate easier access to pathology in tight joint spaces with precision cutting edges and precise resection control. EDM manufacturing technology with stainless steel edges provides maximum sharpness and durability that rarely require resharpening or repair.&nbsp;
Arthrex arthroscopy instruments exemplify our uncompromising quality in products and services focused exclusively on the special needs of the arthroscopic surgeon.&nbsp;

Knee Hand Instruments

Procedure

The PushLock anchor is designed for simple and secure arthroscopic glenohumeral joint instability repair. The knotless technique saves valuable time and eliminates the possibility of knot impingement. This suture-first technique allows surgeons to independently pass suture through a desired amount of tissue prior to anchor implantation. Multiple suture configurations, including simple cinch and mattress stitches, can be accomplished with FiberWire®, FiberLink® SutureTape, FiberStick™, SutureTape, or LabralTape™ sutures using the Labral Scorpion™ or QuickPass™ SutureLasso™ suture passers. Tissue tension can be visualized and adjusted, if necessary, prior to final anchor implantation.
Please note that certain bio (PLLA) anchors and screws are not available for sale in EMEA.

PushLock® Anchor Instability Technique

Designed for arthroscopic instability or rotator cuff repair, the knotless PushLock suture anchor uniquely allows surgeons to adjust tension on the tissue intraoperatively, ensuring precise tissue reduction and fixation.
PushLock anchors are available in 2.4 mm, 2.9 mm, 3.5 mm, and 4.5 mm sizes. The 2.4 mm and 2.9 mm PushLock anchors are optimized for labral repair. Use the 4.5 mm PushLock anchor for rotator cuff repair using the SutureBridge™ technique and the 3.5 mm PushLock anchor during rotator cuff or instability procedures.
The anchor bodies – available in bioabsorbable biocomposite or PLLA and nonabsorbable PEEK materials – are strong, revisable, and radioluscent implants with no MRI artifact. Each anchor has a PEEK eyelet for superior strength during insertion to allow firm tissue tensioning and shifting.1
Reference
1. Arthrex, Inc. Data on file (APT 985). Naples, FL; 2007.

PushLock® Anchor

The SpeedBridge double-row technique is used to repair a rotator cuff tear using a fully threaded SwiveLock® anchor combined with FiberTape® suture to create a quick and secure construct with no knots and only two suture-passing steps. The SpeedBridge double-row technique uses FiberTape suture with three times the contact area compared to a standard #2 FiberWire® suture.1 It provides a broad footprint that can be helpful for repairs to degenerative cuff tissue for which tissue pull-through may be a concern.
Reference
1. Arthrex, Inc. LA0239A. Naples, FL; 2008.
Please note that certain bio (PLLA) anchors and screws are not available for sale in EMEA.

SpeedBridge™ Double-Row Technique

The fully threaded, knotless SwiveLock C anchor is designed for use with FiberWire® or FiberTape® sutures during rotator cuff repair with the SpeedFix™, SutureBridge™, or SpeedBridge™ technique. The Labral SwiveLock anchor is available for instability repair and provides very high pullout and insertion strength while saving time.1 SwiveLock anchors are cannulated and vented to minimize material and allow for potential bony ingrowth.2 The anchors are available in multiple sizes, and in bioabsorbable biocomposite or PLLA and nonabsorbable PEEK materials.
Reference
1. Arthrex, Inc. CC1-00019-EN_E. Naples, FL; 2018.
2. Arthrex, Inc. LA0218A. Naples, FL; 2010.

Mini FiberTape Suture Retriever, with SR Handle

AR-12974SR

Add to Cart

Related Pages

Shoulder

FiberTape^® Retriever

Product

Elbow

FiberTape^® Retriever

Product

Knee

Knee Hand Instruments

Product

Shoulder

PushLock^® Anchor Instability Technique

Procedure

Shoulder

PushLock^® Anchor

Product

Shoulder

SpeedBridge™ Double-Row Technique

Procedure

Shoulder

SwiveLock^® C Anchor

Product

Mini FiberTape Suture Retriever, with SR Handle

AR-12974SR

Add to Cart

Related Pages

Shoulder

FiberTape® Retriever

Product

Elbow

FiberTape® Retriever

Product

Knee

Knee Hand Instruments

Product

Shoulder

PushLock® Anchor Instability Technique

Procedure

Shoulder

PushLock® Anchor

Product

Shoulder

SpeedBridge™ Double-Row Technique

Procedure

Shoulder

SwiveLock® C Anchor

Product

FiberTape^® Retriever

FiberTape^® Retriever

PushLock^® Anchor Instability Technique

PushLock^® Anchor

SwiveLock^® C Anchor