Name: Troubleshooting for the Angel® System - Proper Disposable Set Loading
Uploaded: 2017-06-22T00:00:00Z
Channel: Arthrex

Orthobiologics

Spine

Vet Systems - Orthobiologics

Not Hidden

English  - en

video

VID1-01025-EN | A | Troubleshooting for the Angel® System - Proper Disposable Set Loading

Robert Harrison

Human

Animations demonstrating the features and benefits of a specific product.

Animationen, die die Funktionen und Vorteile eines bestimmten Produkts demonstrieren.

Produktdemonstrationen

Product Demonstrations (Videos & Animations)

Animações demonstrando os recursos e benefícios de um produto específico.

Vídeos de demonstração de produtos

Animaciones que demuestran las características y beneficios de un producto específico.

Videos de demostración de productos

Product Demonstrations

Troubleshooting for the Angel® System - Proper Disposable Set Loading

This is the screen that you should see when you power on the unit. If you do not see this screen and the previous case and select Start New Case, if the user does not remember the sequence to install the processing set, simply touching the eye icon will play an animation that will guide the user through the setup and installation of the Arthrex Angel blood processing set. This animation is only available from this screen. Once you get beyond this screen, you will have to end the case and select New Case to see this animation again. Installation of the Arthrex Angel blood processing set. Open the centrifuge lid. Raise the stator arm while raising the stator arm. Inspect for any damage and that the rubber stator arm end cap is present. Insert the cassette. Push down while turning clockwise. You should hear a click, which means the safety wings are fully engaged. If you do not hear a click, the wings are not engaged. If the safety wings are not fully engaged, this can result in the safety wing contacting the back of the stator arm. This contact will result in increased resistance on the centrifuge, which could cause centrifuge failure. To ensure that the safety wings are properly engaged, load the centrifuge cassette. Push down and turn clockwise until you hear a click. Once the safety wings are engaged, lower the stator arm. Place the tubing into the tubing guide and close the centrifuge lid. If the user has installed the pump tubing first, residual air will not be able to escape from the separation chamber housing. This residual air will prevent the safety wings from becoming engaged. To solve this problem, the syringe will need to be removed from the PRP Outport and the pump tubing will need to be unloaded from the pump rotor assembly. Care should be taken to maintain sterility of the PRP port and collection syringe utilizing aseptic technique. Remove the syringe and recap. Cap the PRP outport and unload the pump tubing. Once the pump tubing has been removed, you can now push down on the separation chamber and rotate clockwise. The safety wings are now engaged. Lower the stator arm. Place the tubing and the tubing guide and close the centrifuge lid. Reload the pump tubing. Utilizing aseptic technique. Reinstall the PRP collection. Syringe.

Troubleshooting for the Angel® System - Proper Disposable Set Loading

Related Pages

Orthobiologics

Das Arthrex Angel™-System

Product

Orthobiologics

Angel^® cPRP- und Knochenmarkaufbereitungssystem

Product

Troubleshooting for the Angel® System - Proper Disposable Set Loading

Related Pages

Orthobiologics

Das Arthrex Angel™-System

Product

Orthobiologics

Angel® cPRP- und Knochenmarkaufbereitungssystem

Product

Angel^® cPRP- und Knochenmarkaufbereitungssystem