Name: NSK High-Speed Drill: Product Demonstration
Uploaded: 2025-03-11T00:00:00Z
Channel: Arthrex
Description: This video demonstrates the setup and maintenance of the NSK Primado 2 system.

Karriere

Human

_blank

Unternehmen

Über uns

Community Events

Globale Offenlegung der Lieferkette

Standorte

Förderung

Produktsicherheit 

Risikomanagement & Compliance

Virtual Patent Marking

Newsroom

SBA Support

Veranstaltungen, Lab-Vorführungen und Schulungsmöglichkeiten ansehen

Medizinproduktberater:in kontaktieren

Unseren Newsletter abonnieren

Medical Education

Kursbeschreibungen

Schulungen & Lehrgänge

ArthroLab™-Standorte

Unser klinisches Personal stellt sich vor

OrthoPedia

Datenschutz

Rechtliche Hinweise

Ethics Helpline

Hilfe

Cookie Settings

Allgemeine Informationen

ACLTear.com

AnkleSprain.com

BunionPain.com

ArthrexEndoscopicSpine.com

OrthoPedia Patient

ShoulderReplacement.com

TheNanoExperience.com

JointPreservation.com

Shoulder

Procedure

Stetige Produktinnovationen und neue Techniken erleichtern die Behandlung zahlreicher Indikationen im Schulterbereich.

Schulter

Team Home Templated (A)

Knee

Stetige Produktinnovationen und neue Techniken erleichtern die Behandlung zahlreicher Indikationen im Kniebereich.

Knie

Elbow

Stetige Produktinnovationen und neue Techniken erleichtern die Behandlung zahlreicher Indikationen im Ellenbogenbereich.

Ellenbogen

Arthroplasty Shoulder

Schulterendoprothetik

Hand and Wrist

Stetige Produktinnovationen und neue Techniken erleichtern die Behandlung zahlreicher Indikationen im Bereich Hand und Handgelenk.

Hand und Handgelenk

Foot and Ankle

Stetige Produktinnovationen und neue Techniken erleichtern die Behandlung zahlreicher Indikationen im Bereich Fuß- und Sprunggelenk.

Fuß und Sprunggelenk

Trauma Lower Extremities

Trauma Upper Extremities

Trauma

Stetige Produktinnovationen und neue Techniken erleichtern die Behandlung zahlreicher Indikationen im Hüftbereich.

Hüfte

Orthobiologics

Stetige Produktinnovationen und neue Techniken erleichtern die Behandlung zahlreicher Indikationen im Bereich Orthobiologie.

Orthobiologie

Cardiothoracic Surgery

Herz-Thoraxchirurgie

Spine

Wirbelsäule

Product

Imaging and Resection

Stetige Produktinnovationen und neue Techniken im Bereich Bildgebung und Resektion für die orthopädische und Allgemeinchirurgie.

Bildgebung & Resektion

Kodierungs-Hotline

eDFUs (Instructions for Use)

Global Enterprise Labeling System (GELS)

Unique Device Identifier (UDI)

Exhibit-Congress & Workshop Requests

Rep Site

The Arthrex Surgeon App

Facebook

Instagram

LinkedIn

Twitter

Youtube

Vet Systems

SAP Supplier Portal

Synergy-Bildgebung und -Resektion

Arthroplastik

Interessensgebiet

eDFU (Elektronische Gebrauchsanweisungen)

Marktzugang und Erstattung

Ressourcen

Operationsverfahren

Endoprothetik

UDI (Unique Device Identifier) 

Produkt

ARTHREX NEWS

Corporate Giving

Bericht zur Unternehmensverantwortung

Arthrex Umweltprogramm

Auszeichnungen

Kontaktieren Sie uns

Globale Lieferkette

Produktübersicht

Trust Center

ÜBER ARTHREX

ASC X

Verwaltung

Zugang zu Innovation

Effizienz im Operationssaal

Erfahrung für das Team - perioperativ

Lieferkette

Tools für die Patientenaufklärung

Praktische Erfahrung für Ärzte und Ärztinnen

Arthrex Armour Technology Protection

Patient:in

Kodierungsleitfäden

Contact Information

Verhaltenskodex

Links zu Informationsquellen

MARKTZUGANG UND ERSTATTUNG

eDFU Policy Update

Arthrex U.S. – Produktgarantie

General Product Information

Anfrage für Marketingmaterial

Feedbackformular zur Qualitätssicherung

Formular für Neukundenanfragen

Anträge für Messekongresse und Workshops

INFORMATIONSMATERIALIEN FÜR KUNDEN

This video demonstrates the setup and maintenance of the NSK Primado 2 system.

Not Hidden

English  - en

video

VID1-007128-en-US | A | NSK High-Speed Drill: Product Demonstration

Animations demonstrating the features and benefits of a specific product.

Animationen, die die Funktionen und Vorteile eines bestimmten Produkts demonstrieren.

Produktdemonstrationen

Product Demonstrations (Videos & Animations)

Animações demonstrando os recursos e benefícios de um produto específico.

Vídeos de demonstração de produtos

Animaciones que demuestran las características y beneficios de un producto específico.

Videos de demostración de productos

Product Demonstrations

NSK High-Speed Drill: Product Demonstration

Introducing NSCs to total surgical system. Let's get started. Power the control unit on. Here's the home screen where you can adjust the speed. Irrigation control. Forward and reverse. You can set the speed and irrigation flow rate by pushing the up down button or moving the track bar. You can adjust additional settings from the control unit, such as forward and reverse priming. Irrigation programming the foot pedal, selecting a specialized handpiece like a perforator or super slim handpiece, and more. Connecting the foot pedal is the same whether you have the single or multifunction foot pedal. Connect the foot pedal by matching the red dot on the foot pedal plug and the red dot on the foot pedal connector. Push the plug all the way in. You'll see the foot pedal indicator illuminate at the bottom of the screen, letting you know it's connected properly. The process for connecting a motor is identical. Connect to either port A or port B by matching the red dots. If necessary, you can connect up to two motors at one time to the control unit. Pro tip if this is the first time connecting a motor, be sure to check the acceleration, brake, and torque settings before using with the motor connected. Press the wrench icon on the lower right front panel and then select motor. Press the up down button to the desired level based on your preference. The Yamato two has a built in memory function that remembers the last level selected to disconnect the motor or foot pedal. Hold the plug near the red dot and pull straight back. Do not twist. This will release the locks and allow you to pull the plug out of the connector port. Now we'll show you how to connect a few different style Handpieces to Pomato two. To connect slim motor, locate the circle on the motor and the triangle on the handpiece. Line them up and press the handpiece into the motor. This is the same process for all Handpieces attaching to a slim motor to disconnect. Hold the motor and handpiece firmly and pull apart. Do not twist. Here's how to set up a perforator for a cranial procedure. Connect the perforator handpiece to a two slim motor by locating the circle on the motor and the triangle on the perforator. Line these up and press the perforator into the motor. To load a perforator bit. Pull down on the lock at the distal end of the perforator while holding it down. Insert the perforator bit into the perforator, twist until it seats in, and then release the lock. Check to make sure the bit is securely locked in by giving it a gentle pull to disconnect. Hold the motor and the perforator firmly and pull apart. Do not twist. When you use the craniotomy handpiece, it's important to note that handpiece and dura guard are separate pieces. Load the burr into the craniotomy handpiece. Ensure the burr is seated by twisting the burr left or right. Lock the burr in place by twisting the Colette until the key lines up with the picture of the locked lock. Pull up on the burr to ensure it is locked properly. Now slide the dura guard over the burr. Twist the guard so that the two pegs on the craniotomy handpiece seat into the holes inside the dura guard. The burr should almost touch the flat part of the dura guard. You will see arrows for open and close. Twist the Colette on the dura guard toward close until finger tight. When using P300 standard attachments, it's important to note these have a universal burr length. Ensure the indicator mark is in the unlocked position. Insert the burr in the burr shaft and twist clockwise until seated. To adjust exposure length, pull down on the knurling grip and twist to the left and set desired length to telescope. Pull down on the knurling grip and rotate to the right or left for desired exposure length. You'll see the different lengths of exposure by the indicator mark on the handpiece. The burr has markings on the shaft as well. To attach the burr guard, slide it over the burr shaft so that it covers the triangle on the shaft. If you are using the P 300 slim attachments, select the desired hub and burr shaft and press them together to build the attachments. Ensure the knurling on the hub has the arrow over the unlocked lock. Insert the burr in the burr shaft, ensuring all laser marked lines are down the shaft and twist the knurling to the left so the arrow is over the locked lock. To telescope, unlock the burr by twisting the knurling to the right so the arrow is over the unlocked lock. Pull the burr out to the desired exposure length and lock the burr again by twisting the knurling to the left so the arrow is over the locked lock. To attach the burr guard or hood, slide it over the burr shaft so that it covers the triangle on the shaft. The Primato two systems irrigation feature allows you to irrigate directly through Primato two. If your preference is to irrigate manually, you can skip this step. To use the irrigation feature, open the pump cover on the right side of the control unit by rotating the knob towards open. Insert the irrigation tube with the section with no blue line into the irrigation pump, so the needle side of the irrigation tube is positioned on the right hand side of the pump. Securely. Place the irrigation tube stoppers into the guide parts located at both ends. Rotate the knob to the closed position. Insert the irrigation pole by sliding it into the stand on the back of the unit. Spike the irrigation bag and open the clamp on the tubing. Slide the irrigation nozzle over the burr shaft with the straight end pointing toward the distal end. Press the tubing into the proximal end of the nozzle on the front of the control unit. Press and hold the image of the tubing on the bottom right of the screen to prime the tubing. You can also control the irrigation flow rate by adjusting the up down arrow or by sliding the track bar. When using a bone motor with a saw attachment, there will be four alignment holes on the attachment and one alignment pin on the motor. Push the attachment straight end to the bone motor. Twist the attachment left or right to ensure the pin and alignment holes are connected. Acted, then twist the removal ring to the left to tighten. If using a hand switch motor, slide the safety lock on the top of the hand. Switch into the on position. Once in the on position, depress the hand switch to operate the motor to load a blade into the sagittal attachment. Depress the fitting and removal button and fit the alignment holes of the blade into the convex part of the attachment. By releasing the fitting and removal button, the blade is set in place. Ensure the blade is in place securely with the fitting and removal button. By twisting the opposite side of the fitting and removal button left or right to load a blade in the oscillating attachment, pull down the removal lever and fit the alignment holes of a blade into the convex part of the attachment. By releasing the removal lever, the blade is set in place to load a blade in the reciprocating attachment, insert a blade into the attachment while depressing the fitting and removal button, and push it in further by lightly twisting the blade by releasing the fitting and removal button. The blade is set in place. The use of Pana Spray Plus can help the longevity of your handpieces by expelling matter in the handpiece and lubricating the ball bearings. Use of Pana spray happens in SPD before sterilization. Remove the white cap on the top of the bottle of Pana spray. Attach the silver fitting over the top of the Pana spray bottle. Optionally, you can slide the nozzle holder over the top of the silver fitting. If not done already, insert the open end of the tubing into the top of the black valve. Open the black valve by rotating it up so that it's with a cloth or towel, and press down on the button on top of the spray nozzle until the liquid coming out of the handpiece is clear. This should only take a few seconds to remove the handpiece. Press the release button on the adapter and pull the handpiece away from the adapter.

NSK High-Speed Drill: Product Demonstration

Related Pages

Spine

Endoskopische thorakale transforaminale Diskektomie

Product

Spine

Interlaminäre endoskopische Diskektomie

Product

Spine

Interlaminar Endoscopic Lateral Recess Decompression

Product

Spine

Endoskopische weit laterale lumbale transforaminale Diskektomie

Product

Spine

Endoscopic Trans-SAP Approach for Lumbar Discectomy

Product

Spine

Transforaminale endoskopische Diskektomie

Product

Spine

Cervical Foraminotomy and Decompression

Procedure

Operationsverfahren

Produkt

Medical Education

Unternehmen

Ressourcen

Patient:in

Karriere