FiberStick SutureTape, 1.3 mm (black/white) one end stiffened, 5/box

FiberStick 1.3 mm SutureTape, Braided Polyblend Suture,50 inches, Black/White, One End Stiffened, 13.7 inches (Qty 5)

Finished Product

AR-7509T

Human

Shoulder

Product

Der FiberStick-Faden besteht aus einem #2 FiberWire-Faden. Der 30 cm lange, versteifte Abschnitt des FiberStick-Fadens ermöglicht ein einfaches und komfortables Vorschieben über die meisten kanülierten Instrumente. Monofile Fäden oder Transportdrähte sind nicht mehr erforderlich. FiberStick-Fäden werden in einem dünnen Kunststoffröhrchen geliefert, das dabei hilft, den versteiften Faden bis zu seinem Gebrauch zu schützen. TigerStick-Fäden sind mit FiberStick-Fäden vergleichbar. Sie sind jedoch weiß mit einem schwarzen Markierungsstrang, so dass die Identifikation des Fadens erleichtert wird.

FiberStick™- und TigerStick®-Fäden

Child (D)

Beim SutureTape handelt es sich um eine verbesserte Version des FiberWire-Fadens und somit um die Nahttechnologie der nächsten Generation. Die Stärke des zu einem flachen Band geflochtenen SutureTapes ist vergleichbar mit der eines FiberWire-Fadens, der Faden schneidet jedoch weniger leicht ins Gewebe ein.1 Es verfügt über eine bessere Handhabbarkeit und Knotensicherheit, wobei Knoten auch weniger stark auftragen. Das SutureTape ist in Breiten von 0.9, 1.3 und 1.7 mm sowie in zahlreichen Farben, Mustern und Nadeloptionen erhältlich.
Referenz
1. Arthrex, Inc. LA1-00038-EN_B. Naples, FL; 2017.

SutureTape

Procedure

The SwiveLock anchor is designed for knotless, arthroscopic glenohumeral joint instability repair. It is sized and used similarly to the 2.9 mm&nbsp;PushLock® anchor, with the key difference being its&nbsp;threaded and vented anchor body, which&nbsp;"twists in"&nbsp;rather than&nbsp;"taps in.” The SwiveLock anchor provides the ability to independently pass the suture through a desired amount of tissue prior to anchor implantation. This feature allows the surgeon to properly capture the amount of capsule or labrum required for the pathology being treated. The surgeon can visualize and adjust tissue tension prior to final implant installation. The anchor is twisted into its final position and the sutures are cut flush.
The body of the anchor is available in a biocomposite material that combines PLLA with ß-TCP, or a nonabsorbable thermoplastic material, polyetheretherketone (PEEK). Both are strong, revisable, and radiolucent implants. Both versions use a PEEK eyelet for superior strength during insertion, allowing for firm tissue tensioning and shifting.

SwiveLock® Instability Technique - Anterior

The SwiveLock®&nbsp;anchor is a knotless suture anchor designed for arthroscopic glenohumeral joint instability repair. It is sized and used similarly to the 2.9 mm PushLock® anchor, but features a threaded and vented anchor body "twists-in" rather than "taps-in". The anchor allows the suture to be passed through the desired amount of tissue independently, before the anchor is implanted. This feature allows the surgeon to properly capture the amount of capsule or labrum required for the pathology being treated. The surgeon can visualize and adjust tissue tension prior to final implant installation. The anchor is twisted into its final position and the sutures are cut flush.
The body of the anchor is available in a biocomposite material that combines PLLA with ß-TCP, or a nonabsorbable thermoplastic material, polyetheretherketone (PEEK). Both are strong, revisable, and radiolucent implants. Both versions use a PEEK eyelet for superior strength during insertion to allow firm tissue tensioning and shifting.

TigerStick, mit 1.3 mm SutureTape

AR-7509T

Related Pages

Shoulder

FiberStick™- und TigerStick^®-Fäden

Product

Shoulder

SutureTape

Product

Shoulder

SwiveLock® Instability Technique - Anterior

Procedure

Shoulder

SwiveLock® Instability Technique - Posterior

Procedure