Name: SynergyResection™ Wireless Footswitch Pairing
Uploaded: 2019-11-01T00:00:00Z
Channel: Arthrex

Imaging and Resection

Not Hidden

English  - en

video

VID1-000685-en-US | A | SynergyResection™ Wireless Footswitch Pairing

Human

A video walk though on a specific topic providing details on intended use.

Ein Video, das ein bestimmtes Thema behandelt und Details zum Verwendungszweck enthält.

Video-Anleitungen

Video Tutorials

Vídeo explicativo sobre um tópico específico, fornecendo detalhes sobre o uso pretendido.

Vídeo tutoriais

Video explicativo sobre un tema específico que proporciona detalles sobre el uso previsto.

Video tutoriales

Synergy<sup>Resection™</sup> Wireless Footswitch Pairing

Pairing the synergy Resection wireless footswitch. The Footswitch has the same functionality as the predecessor AR 8315, but with a smaller footprint by using unique radio frequency technology. The communication between Footswitch and receiver is extremely reliable. When a pedal is pressed, a signal is emitted from the footswitch and the signal is instantly picked up by the paired receiver, which is plugged into the synergy resection console. To pair a new Synergy Resection wireless footswitch with the console, you must first install the two AA alkaline batteries that came with the packaging into the Footswitch. Insert the plus side end first, and the side end should be toward the compartment cover cap screw on the cap. Power on the Synergy Resection console. Next, plug the receiver into a footswitch port on the console. Now fully plug the receiver straight into a foot switch port. Get into the habit of horizontally aligning the receiver to the handpiece. Be sure to align the red dot on the receiver to the red dot on the console. Now that the receiver is plugged in, you will see the on button turn green, which means it is receiving power and can now be paired. Hold the Footswitch vertically so that the handle of the footswitch is facing the ceiling. The Footswitch must be within six feet of the receiver during the entire pairing process. Simultaneously, press the pairing button on the footswitch and on the receiver, then release them when the battery indicator light blinks rapidly. This means that the Footswitch is in pairing mode and can last up to 11 seconds. Pairing is successful when the red light stops blinking. The pedals on the Footswitch will not be active until this process is completed. Pairing is unsuccessful if the battery light continuously flashes slowly. If this occurs, try the pairing process again. If it is still unsuccessful, try replacing the batteries within the footswitch and ensure that the batteries are inserted correctly. Positive end first. Also make sure that the receiver is fully plugged into the footswitch port of the console. Once this process is completed, you should never have to repeat this process again, even after replacing the batteries. In order to activate the Footswitch. The Footswitch must be laid flat on the ground. There are sensors in it that disable the Footswitch when it is vertically oriented as a safety feature. When the Footswitch battery life is low, the battery signal on the receiver will illuminate in red. When this occurs, replace the batteries. Once the batteries are replaced, press a button or pedal on the footswitch to clear the low battery signal from the receiver. Corresponding LEDs on the receiver illuminate when a pedal is pressed on the footswitch. This is also confirmation that the Footswitch is communicating with the receiver. Now you can use the new Synergy Resection Wireless Footswitch as you would with any Arthrex multifunction footswitch.

Synergy^Resection™ Wireless Footswitch Pairing

Related Pages

Imaging and Resection

Synergy^Resection™ Shaver

Product

SynergyResection™ Wireless Footswitch Pairing

Related Pages

Imaging and Resection

SynergyResection™ Shaver

Product

Synergy^Resection™ Wireless Footswitch Pairing

Synergy^Resection™ Shaver