Name: iBalance® Patellofemoral Joint Arthroplasty
Uploaded: 2013-08-22T00:00:00Z
Channel: Arthrex

Arthroplasty Knee

Not Hidden

English  - en

video

AN1-00130-EN | C | iBalance® Patellofemoral Joint Arthroplasty

Human

A general overview including the relevant steps of an Arthrex surgical technique. These animations always include a voice-over explaining the process.

Eine allgemeine Übersicht, einschließlich der relevanten Schritte einer Arthrex Operationsanleitung. Diese Animationen enthalten immer Voice-Overs, die den Prozess erklären.

Operationstechnik-Animationen

Surgical Technique Animations

Visão geral incluindo as etapas relevantes de uma técnica cirúrgica Arthrex. Essas animações sempre incluem uma narração explicando o processo.

Animações de técnicas cirúrgicas

Descripción general que incluye los pasos relevantes de una técnica quirúrgica de Arthrex. Estas animaciones siempre incluyen una voz en off que explica el proceso.

Animaciones de técnicas quirúrgicas

iBalance® Patellofemoral Joint Arthroplasty

The Arthrex iBalance FJ system is designed for the treatment of localized or diffuse arthritic changes in the patellofemoral compartment of the knee. The completely instrumented technique focuses on creating key reproducible transition zones, reliable rotational alignment, and suitable femoral resection every time. Patellar preparation may occur prior to or after femoral preparation, depending on surgical preference. A caliper is available to measure the thickness prior to and after resection. The size of patellar component is assessed, and lug holes are drilled to accommodate pegs on the domed patellar component. Soft tissues are elevated slightly using the blunt end of an extramedullary guide as it is inserted, ensuring it rests on the interior surface. A five millimeter Intramedullary hole is drilled, matching native flexion. The entry point should be at least 20mm posterior to the deepest aspect of the trochlea. The guide is removed. The side specific base is inserted into the intramedullary hole. Rotational alignment is established and a pin is placed medially. The cutting guide is attached. The level of resection is established by a single stylus representing the thickness of all size components, which minimizes the risk of overstuffing first at the depth of the trochlea, followed by the anterior aspect of the lateral condyle. This captured guide may be pinned into place and the resection is performed. The cutting guide and all alignment instrumentation is removed. Proper component size is established through size specific finishing guides. A proximal position stylus rests on the articular cartilage, defining proper proximal distal position. Proper size ensures the component will not overhang at the anterior lateral aspect of the component, as represented by the shape of the finishing guide. Headed pins secure the block into place. The stylus is removed. An optional pin may be placed posteriorly for added fixation. Reamers are used to create the radius of the trochlear component both distally and proximally. The radii created by the reamers are then extended using a series of guided osteotomy. Osteotomies are first used distally. They are then used proximally. A final osteotomy is used to create a clean up punch in the middle. These single use osteotomies are custom shaped and hollow ground, maximizing precision on both the medial and lateral sides of the trochlea. The finishing block is removed. Ephemeral trial is used to test establish proper transition zones. Transition. The trial is pinned laterally. A lug guide is positioned, then pinned medially, ensuring proper fixation. Three lug holes are drilled. Removal of the trial and lug guide may take place. An optional trial may be used or one can proceed with standard cementation.

iBalance® Patellofemoral Joint Arthroplasty

Related Pages

Arthroplasty Knee

Sistema iBalance^® para APF

Product

iBalance® Patellofemoral Joint Arthroplasty

Related Pages

Arthroplasty Knee

Sistema iBalance® para APF

Product

Sistema iBalance^® para APF