Sterile Drill for 3.5 mm Labral Swivelock

Finished Product

AR-2325D-ST

Human

Shoulder

Procedure

Knotless 1.8 FiberTak® soft anchors and SwiveLock® anchors offer solutions for repairing HAGL and RHAGL lesions.

HAGL and RHAGL Lesion Repair

BioComposite Labral SwiveLock Anchor, 3.5 mm x 15.8 mm

Bio-Composite SwiveLock Fadenanker, 3.5 x 15.8 mm, perforiert

Suture Anchor, BioComposite SwiveLock, 3.5 x 15.8 mm, Vented

Anclaje de sutura, SwiveLock de BioComposite, Ø 3.5 mm x15.8 mm, fenest

ANCORA DE SUTURA BIOCOMPOSTA SWIVELOCK (3.5MM X 15.8MM)

Âncora de sutura, BioComposite SwiveLock

PEEK Labral SwiveLock 3.5 mm x 15.8 mm

PEEK SwiveLock Fadenanker, 3.5 x 15.8 mm, perforiert VE5, steril, IM

Suture Anchor, PEEK SwiveLock, 3.5 mm x 15.8 mm, Vented

Anclaje de sutura, SwiveLock de PEEK, Ø 3.5 mm x 15.8 mm,fenestrado

Âncora de sutura, PEEK SwiveLock, 3.5 mm x 15.8 mm, perfurada

Child (D)

Product

A SwiveLock labral de parafusar e sem nós foi desenvolvido para ser usado no tratamento da instabilidade do ombro. A âncora é utilizada como uma PushLock do labro. Proporciona todas as mesmas vantagens dos itens sem nós (perfil baixo, rapidez, técnica de sutura primeiro com várias opções de configuração dos pontos), além dos benefícios de maior resistência a tração e ventilação, que pode permitir a osseointegração. A âncora está disponível nas opções de material BioComposite e PEEK.

SwiveLock® Labral

The SwiveLock anchor is designed for knotless, arthroscopic glenohumeral joint instability repair. It is sized and used similarly to the 2.9 mm&nbsp;PushLock® anchor, with the key difference being its&nbsp;threaded and vented anchor body, which&nbsp;"twists in"&nbsp;rather than&nbsp;"taps in.” The SwiveLock anchor provides the ability to independently pass the suture through a desired amount of tissue prior to anchor implantation. This feature allows the surgeon to properly capture the amount of capsule or labrum required for the pathology being treated. The surgeon can visualize and adjust tissue tension prior to final implant installation. The anchor is twisted into its final position and the sutures are cut flush.
The body of the anchor is available in a biocomposite material that combines PLLA with ß-TCP, or a nonabsorbable thermoplastic material, polyetheretherketone (PEEK). Both are strong, revisable, and radiolucent implants. Both versions use a PEEK eyelet for superior strength during insertion, allowing for firm tissue tensioning and shifting.

SwiveLock® Instability Technique - Anterior

The SwiveLock®&nbsp;anchor is a knotless suture anchor designed for arthroscopic glenohumeral joint instability repair. It is sized and used similarly to the 2.9 mm PushLock® anchor, but features a threaded and vented anchor body "twists-in" rather than "taps-in". The anchor allows the suture to be passed through the desired amount of tissue independently, before the anchor is implanted. This feature allows the surgeon to properly capture the amount of capsule or labrum required for the pathology being treated. The surgeon can visualize and adjust tissue tension prior to final implant installation. The anchor is twisted into its final position and the sutures are cut flush.
The body of the anchor is available in a biocomposite material that combines PLLA with ß-TCP, or a nonabsorbable thermoplastic material, polyetheretherketone (PEEK). Both are strong, revisable, and radiolucent implants. Both versions use a PEEK eyelet for superior strength during insertion to allow firm tissue tensioning and shifting.

Sterile Drill for 3.5 mm Labral Swivelock

AR-2325D-ST

Páginas Relacionadas

Ombro

HAGL and RHAGL Lesion Repair

Procedimento

Ombro

SwiveLock^® Labral

Produto

Ombro

SwiveLock® Instability Technique - Anterior

Procedimento

Ombro

SwiveLock® Instability Technique - Posterior

Procedimento