FastThread PEEK Interference Screw 8 mm × 20 mm screw

FastThread-Schraube, Interferenz, PEEK, 8 mm x 20 mm

FastThread PEEK Interference Screw with Disposable Sheath, 8x20mm

FastThread, tornillo de interferencia PEEK, 8 mm x 20 mm

Parafuso de interferencia em PEEK FastTread, 8x20mm

Finished Product

AR-4020P-08

Human

Knee

Procedure

Arthrex offers a comprehensive selection of fixation devices for a variety of bone-patellar tendon-bone (BTB) graft techniques. These options include adjustable, continuous-loop suspensory fixation, and interference screws in a variety of materials. The TightRope® implant, which has been used in 2 million procedures globally,1 was designed to simplify ACL reconstruction and facilitate advanced techniques, such as the GraftLink® technique. BioComposite FastThread™ interference screws, which are composed of time-tested material with more than a decade of clinical success and implantation, allow for faster screw insertion and better graft protection.2
References
1. Arthrex, Inc. Data on file (sales data as of September 18, 2018). Naples, FL; 2018.
2. Arthrex, Inc. LA1-0199-EN_E. Naples, FL; 2018.
Please note that certain bio (PLLA) anchors and screws are not available for sale in EMEA.

BTB Autograft ACL Reconstruction 

Child (D)

Once the minimally invasive or open incision is made and proper soft-tissue windows are established, use the fibular, tibial, and/or femoral collateral marking hooks for anatomic precision and osseous measurements when drilling the appropriate reconstruction tunnels. Using the femoral collateral marking hook with the parallel drill guide will increase anatomic femoral drilling efficiency by significantly reducing convergent tunnels and allowing for accurate guide pin placement at multiple incremental distances. During tunnel creation, use the spooned ends of the collateral ligament retractor to retract the neurovascular structures and the collateral ligament rasp to chamfer the aperture of the completed reconstruction tunnels. Then use FiberWire® or FiberStick™ suture to pass the prepared grafts and tension to the desired position prior to graft fixation.

Anatomic Collateral Ligament Reconstruction

Arthrex offers the most advanced techniques and instruments for hamstring harvesting and preparation for ACL reconstruction. A reproducible harvest can be performed through a traditional anterior or posterior approach using the minimally invasive hamstring harvest technique and specialized tendon strippers.
The GraftLink®&nbsp;technique provides an anatomic, minimally invasive, and reproducible ACL reconstruction procedure. When used in combination with anatomic guides, the FlipCutter® III drill allows independent femoral and tibial "retrodrilling" to create sockets while maintaining the cortices to maximize fixation. Femoral and tibial TightRope® II implants, with a proprietary 5-point locking system, make the GraftLink technique the most reproducible ACL reconstruction available.
Anatomic: Independent tibial and femoral socket preparation with FlipCutter III reamer and/or low-profile reamers facilitate unconstrained placement of the ACL graft.
Minimally Invasive: Socket preparation with the FlipCutter III reamer limits soft-tissue dissection and helps preserve bone and periosteum.
Reproducible: The GraftPro® graft prep system simplifies graft preparation; the tapered graft and adjustable ACL TightRope II buttons facilitate graft passing, fine tuning of graft depth, and graft tensioning from the femoral and tibial sides.

Hamstring Autograft ACL Reconstruction

Product

Interference screws are constructed using the high quality that is synonymous with the Arthrex name. The complete family includes biocomposite interference screws (comprised of 30% biphasic calcium phosphate and 70% PLDLA), PEEK interference screws (made from PEEK-OPTIMA™), metal interference screws (made from titanium for femoral and tibial fixation of soft-tissue or bone).
 
PEEK-OPTIMA is a trademark of Invibio.

Interference Screws

For more than a decade, Arthrex has offered multiple collateral ligament reconstruction techniques, ranging from socket- and tunnel-based aperture fixation with FastThread™ interference screws to suspensory fixation using TightRope® technology.&nbsp;
 
 
The newest addition to our anchor portfolio, Knee FiberTak® anchors allow surgeons to perform minimally invasive collateral ligament reconstruction techniques to restore stability while preserving native anatomy. This versatile line supports both hybrid and all-onlay reconstruction, using both knotted and knotless SutureTape technology in conjunction with the InternalBrace™ technique.
The InternalBrace surgical technique is intended only to augment the primary repair/reconstruction by expanding the area of tissue approximation during the healing period and is not intended as a replacement for the native ligament. The InternalBrace technique is for use during soft tissue-to-bone fixation procedures and is not cleared for bone-to-bone fixation.&nbsp;

Lateral Collateral Ligament (LCL) and Posterolateral Corner (PLC) Reconstruction 

MCL reconstruction is typically performed when the MCL is severely injured or in cases of chronic MCL laxity. During an MCL reconstruction, autograft or allograft tissue is used to reconstruct the injured ligament. Graft-fixation technology for MCL reconstruction has evolved from staples, posts and washers, and interference screws to less invasive and easier-to-use suspensory fixation, including the TightRope® implant, and 
all-suture anchor technology, such as the Knee FiberTak® anchor.&nbsp;
Adding the InternalBrace™ technique to an MCL repair may result in lower failure rates and less residual laxity post-op as well as shorter immobilization times and faster return to play.1 Additionally, FiberTape® suture has been used for more than 15 years in more than 4 million cases, including tendon and ligament-bridging repairs.
The InternalBrace surgical technique is intended only to support the primary repair and is not intended as a replacement for the standard of care using biologic augmentation in a primary repair.&nbsp;The InternalBrace surgical technique is intended only for soft-tissue-to-bone fixation and is not cleared for bone-to-bone fixation.
Reference
 
1. van Eck CF, Nakamura T, Price T, Linde M, Smolinski P. Suture tape augmentation improves laxity of MCL repair in the ACL reconstructed knee.&nbsp;Knee Surg Sports Traumatol Arthrosc. 2021;29(8):2545-2552. doi:10.1007/s00167-020-06386-7

Medial Collateral Ligament (MCL) Reconstruction

PCL injuries occur during sports-related activities or high-velocity, traumatic accidents. Indications for operative treatment of PCL tears include acute injuries, active young patients, and either isolated grade 3 tears or combined injuries, such as a grade 2 injury with posterolateral corner instability. 

Arthrex has several techniques for isolated PCL injuries—including PCL inlay reconstruction, double-bundle PCL reconstruction, and the transtibial PCL RetroConstruction™ procedure—that can be combined with multiligament or posterolateral corner (PLC) reconstruction.
Additionally, a comprehensive line of PCL reconstruction instrumentation is available for a variety of PCL reconstruction techniques, as well as autografts and allografts and single- or double-bundle options.

Posterior Cruciate Ligament (PCL) Reconstruction

Quadriceps tendon grafts offer unique benefits for cruciate ligament reconstruction, such as a predictably large diameter, low morbidity,1 and a preferable stiffness profile for knee ligament reconstruction.
The QuadPro™ tendon harvester is designed to harvest a quadriceps or patellar tendon graft using a minimally invasive technique.2-4 The sharp tip cores out an approximate cylindrical graft. The harvester's ergonomically designed handle features graduations on the clear shaft to allow visualization of approximate graft length during harvesting. Available in four sizes (8 mm to 11 mm), the QuadPro tendon harvester can accommodate each patient’s unique needs as well as the surgeon’s preference for graft diameter.
The FiberTag® TightRope® implant facilitates attachment of single-ended grafts, such as quadriceps tendon grafts, to the ACL TightRope RT and ABS implants. FiberTag suture is integrated into the TightRope implant for a strong, consistent connection between the suture and TightRope loop. A simplified suturing technique, along with innovative packaging and the GraftClamp graft preparation instrument, make preparing quadriceps tendon grafts faster and more reproducible than ever.
References
1. Arthrex, Inc. LA1-00100-EN_K. Naples, FL; 2021.
2. Xerogeanes JW, Mitchell PM, Karasev PA, Kolesov IA, Romine SE. Anatomic and morphological evaluation of the quadriceps tendon using 3-dimensional magnetic resonance imaging reconstruction: applications for anterior cruciate ligament autograft choice and procurement. Am J Sports Med. 2013;41(10):2392-2399. doi:10.1177/0363546513496626
3. Hadjicostas PT, Soucacos PN, Berger I, Koleganova N, Paessler HH. Comparative analysis of the morphologic structure of quadriceps and patellar tendon: a descriptive laboratory study. Arthroscopy. 2007;23(7):744-750. doi:10.1016/j.arthro.2007.01.032
4. Krebs N, Yaish A, O’Neill N. Anatomic evaluation of the quadriceps tendon in cadaveric specimens: application for anterior cruciate ligament reconstruction graft choice. SMRJ. 2019;4(1):7961. doi:10.51894/001c.7961

FastThread PEEK Interference Screw 8 mm × 20 mm screw

AR-4020P-08

Related Pages

Knee

BTB Autograft ACL Reconstruction

Procedure

Knee

Anatomic Collateral Ligament Reconstruction

Procedure

Knee

Hamstring Autograft ACL Reconstruction

Procedure

Knee

Interference Screws

Product

Knee

Lateral Collateral Ligament (LCL) and Posterolateral Corner (PLC) Reconstruction

Procedure

Knee

Medial Collateral Ligament (MCL) Reconstruction

Procedure

Knee

Posterior Cruciate Ligament (PCL) Reconstruction

Procedure

Knee

Quad Tendon Autograft ACL Reconstruction

Procedure