BirdBeak, 22° Up Tip, 220 mm w/ WishBone Handle

WishBone BirdBeak Penetrator, Schaft gerade, Maul 22° aufgebogen, 220mm lang

BirdBeak, 22° Up Tip, 220 mm, with WishBone Handle

BirdBeak, punta elevada 22°, 220 mm, con mango WishBone

BirdBeak, ponta 22° para cima, 220 mm, com punho WishBone

Finished Product

AR-14890W

Hip Arthroscopy Master Instrument Set

Hüftarthrsoskopie Master Instrumenten Set

Hip Arthroscopy Master Instrumentation Set

Product

With ergonomically designed handles to reduce hand fatigue, handheld hip instruments work well in both the supine and lateral decubitus position. Each instrument has a 220 mm shaft to facilitate joint access in larger patients or while using long cannulas. To reach the furthest recesses of the hip joint, the punches are available in a variety of angled tips and shafts, and the graspers are designed for loose body retrieval and tissue elevation. Achieve suture passage using the BirdBeak® and Penetrator® suture passers, each available in multiple angled tip and shaft options. Suture grasping and cutting instruments are included to facilitate suture management during labral repair and reconstruction as well as capsular application.

Not Hidden

English  - en

application/pdf

Hip Next Generation in Soft-Tissue Repair and Reconstruction 2022

Hip Length Hand Instruments

Child (D)

Procedure

Tears of the gluteus medius tendon are a common source of lateral hip pain and a cause of greater trochanteric pain syndrome (GTPS). These tendons are sometimes referred to as the “rotator cuff of the hip.” Partial and full-thickness tears can be repaired in an open or endoscopic fashion with techniques similar to those used in shoulder surgery.

Benjamin G. Domb, MD (Chicago, IL), demonstrates the repair of a partial-thickness gluteus medius and minimus tear using the 2.6 Knotless FiberTak® soft anchors and a minimally invasive transtendinous approach. In this cadaveric demonstration, Dr. Domb outlines the surgical steps for repairing partially torn hip abductor tendons with a tendon compression bridge created between the all-suture anchors.

video

Videos - OP-Anleitung

Vídeos — Técnicas cirúrgicas

Videos de técnicas quirúrgicas

Surgical Technique Videos

Partial-Thickness Gluteus Medius Repair Using the 2.6 Knotless FiberTak® Soft Anchor

This animation demonstrates the repair of a partial-thickness gluteus medius tear using the Gluteus Medius Tendon Repair Implant System.

OP-Anleitung Animationen

Animações — Técnica cirúrgica

Animaciones de técnicas quirúrgicas

Surgical Technique Animations

Knotless Compression Bridge Technique for Repair of an Undersurface Tear of the Gluteus Medius

Carlos A. Guanche, MD, (Van Nuys, CA) demonstrates an endoscopic double‐row knotless repair using a SpeedBridge™ repair technique with ArthroFLEX®* allograft augmentation for a full‐thickness abductor tendon tear. In this cadaveric demonstration, he outlines his technique for repairing tears off the superolateral facet of the greater trochanter.
*ArthroFLEX is a registered trademark of LifeNet Health.

Endoscopic SpeedBridge™ Abductor Tendon Repair With ArthroFLEX® Allograft Augmentation

Benjamin G. Domb, MD (Chicago, IL), discusses a full-thickness gluteus medius repair with augmentation using a Knotless SwiveLock® anchor and an ArthroFlex dermal allograft after a total hip arthroplasty procedure. Dr. Domb outlines the surgical steps to perform the repair and describes various treatment options for pathology associated with abductor tendons.

Vídeos apresentações de casos

Video presentaciones de casos

Case Presentation Videos

Gluteus Medius Tendon Augmentation With Allograft

OP-Anleitungen

Guias de técnicas cirúrgicas

Guías de técnicas quirúrgicas

Surgical Technique Guides

Knotless Compression Bridge Technique Using the Gluteus Medius Tendon Repair Implant System Surgical Technique Introduction The hip abductor tendon compression bridge technique is intended for partial-thickness undersurface tears of the gluteus medius tendon. This bridging technique enhances footprint compression to maximize tendon to bone healing.1 Surgical Technique 1 Establish a distal anterior lateral accessory (DALA) portal for viewing and insert a shaver through either an anterior lateral (AL) or posterior lateral (PL) portal. Excise the trochanteric bursa to clearly view the intertrochanteric space and gluteus medius tendon. Once AL and PL portals are established, insert two flexible Trim-It™ custom hip cannulas (a). This will improve suture management and reduce the chance of soft-tissue bridges when passing sutures. (a) 02 I Knotless Compression Bridge Technique Using the Gluteus Medius Tendon Repair Implant System 2 Insert the drill guide and obturator through the PL cannula and then directly through the gluteus medius tendon and down to bone. Option: Prior to placing the drill guide through the tendon, use a PowerPick™ instrument or chondro pick to create small micropunctures for bone marrow stimulation to promote tendon to bone healing. 3 3a While keeping the drill guide tip firmly against the bone, remove the obturator from the guide and insert the drill bit. Prepare a 2.6 mm bone socket by drilling until the collar of the drill impacts the back of the drill guide (3a). Knotless Compression Bridge Technique Using the Gluteus Medius Tendon Repair Implant System I 03 (a) 4 Insert the anchor through the drill guide with gentle impaction until the inserter handle meets the drill guide with a positive stop (a). Take care to avoid impacting the drill guide into the bone, which could compromise the cortex and lead to poor fixation. (b) Pull the black suture release tab and remove the inserter and drill guide. Lightly pull on the sutures to set the 2.6 FiberTak® soft anchor (b). 5 Repeat the same process through the AL portal to insert the anterior anchor. 04 I Knotless Compression Bridge Technique Using the Gluteus Medius Tendon Repair Implant System 6 7 Once both anchors have been implanted, retrieve the blue repair suture from the anterior anchor through the PL cannula and the blue repair suture from the posterior anchor through the AL cannula. 8 Note: Prior to loading the repair suture into the loop of the TigerLink™ suture, clear the repair suture and looped end of the Tigerlink suture with a retriever. This will improve suture management during shuttling of the sutures. 9 Transfer the repair suture by pulling the SutureTape side of the white/black shuttle suture until light resistance is felt. Complete a series of light tugs until the repair suture passes through the knotless anchor mechanism and back out of the cannula. Repeat the same process through the PL cannula, and once both sutures have been fed through the knotless anchor mechanism, equally tension the repair sutures until adequate compression of the tissue has been applied. Knotless Compression Bridge Technique Using the Gluteus Medius Tendon Repair Implant System I 05 10 (a) Tension the construct and cut the repair suture limbs using the included knotless suture tensioner/cutter (a). 11 Final fixation. 11a Add additional implants as deemed necessary based on the extent of the partial tear. (a) 06 I Knotless Compression Bridge Technique Using the Gluteus Medius Tendon Repair Implant System Ordering Information Product Description Item Number Gluteus Medius Repair Implant System AR-2941GM-CP 2.6 Knotless FiberTak® Anchors, qty. 2 Drill Guide and Obturator 2.6 FiberTak Anchor Drill Knotless Suture Tensioner/Cutter Products may not be available in all markets because product availability is subject to the regulatory approvals and medical practices in individual markets. Please contact your Arthrex representative if you have questions about the availability of products in your area. Reference 1. Hartigan DE, Mansor Y, Perets I, Walsh JP, Mohr MR, Domb BG. Knotless “suture staple” technique for endoscopic partial thickness abductor tendon repair. Arthrosc Tech. 2018;7(10):e975-e980. doi:10.1016/j. eats.2018.06.002 Knotless Compression Bridge Technique Using the Gluteus Medius Tendon Repair Implant System I 07 This description of technique is provided as an educational tool and clinical aid to assist properly licensed medical professionals in the usage of specific Arthrex products. As part of this professional usage, the medical professional must use their professional judgment in making any final determinations in product usage and technique. In doing so, the medical professional should rely on their own training and experience, and should conduct a thorough review of pertinent medical literature and the product’s directions for use. Postoperative management is patient-specific and dependent on the treating professional’s assessment. Individual results will vary and not all patients will experience the same postoperative activity level and/or outcomes. View U.S. patent information at www.arthrex.com/corporate/virtual-patent-marking arthrex.com © 2021 Arthrex, Inc. All rights reserved. LT1-000181-en-US_C

Knotless Compression Bridge Technique Using the Gluteus Medius Tendon Repair Implant System

Gluteus Medius Repair

Gluteus Medius Repair Implant System

TRIM-IT Cannula Switching Stick, Cannulated, 4 mm

TRIM-IT-Hüftkanüle, Wechselstab, kanüliert, 4 mm

TRIM-IT Cannula Switching Stick, Cannulated, 4 mm

TRIM-IT, ferramenta para transformar a inserção inic ial da cânula, canulada, 4 mm

TRIM-IT Cannula Obturator, Detachable

TRIM-IT, obturador da cânula, destacável

TRIM-IT, obturador da cânula, destacáve

The Hip Arthroscopy Master Instrument Set was designed with functionality in mind to complement the vast array of arthroscopic procedures being performed in the hip. It contains a full complement of joint access, tissue resection, grasping, microfracture and suture management instruments. All of the necessary instruments are now at your fingertips when performing diagnostic hip arthroscopy, loose body removal, tissue and bone resection, labral repair, microfracture, capsulotomy, and osteoplasty for femoroacetabular impingement (FAI).

Hip Arthroscopy Master Instrument Set

The WishBone™ Hip Hand Instruments with ergonomically designed handles work well in either the supine or lateral decubitus position, while reducing hand fatigue. Each has a 220 mm shaft to facilitate joint access in larger patients or while using long cannulas. The punches are offered in a variety of angled tips and shaft angles to reach the furthest recesses of the hip joint. The graspers are designed for loose body retrieval and tissue elevation.Suture passage can be achieved using the BirdBeak® and Penetrator™ Suture Passers, available in multiple angled tip and shaft options. Suture grasping and cutting instruments are included to facilitate suture management during labral repair and reconstruction as well as capsular plication.

BirdBeak, 22° Up Tip, 220 mm w/ WishBone Handle

AR-14890W

Add to Cart

AR-14890W is a Set Item Of (2)

AR-6517S

AR-6517WS

Related Pages

Hip

Hip Length Hand Instruments

Product

Hip

Gluteus Medius Repair

Procedure

Hip

Hip Arthroscopy Master Instrument Set

Product

Hip

WishBone™ Hip Instrument Set

Product