Plate, Tibial A/P Sloped Osteotomy, 15 mm

Sloped Opening Wedge Osteotomie Platte, tibial A/P, Titan, 15.0 mm, steril, IM

Tibial A/P Sloped Osteotomy Plate, Titanium, 15.0 mm

Placa para osteotomía tibial con pendiente A/P, Ti, 15 mm

PLACA PARA OSTEOTOMIA TIBIAL, INCLINACAO A/P, 15 MM, TITANIO

Finished Product

AR-13200ST-15.0

Human

Knee

Product

Titanium
The titanium ContourLock HTO Plates were designed to be a anatomically curved and low profile. The ContourLock HTO Plate is a great choice for high demand patients needing a stronger locking construct for weight-bearing. These plates are available in wedgeless, straight, and sloped options.
The titanium Tibial Opening Wedge Osteotomy Plates feature a 4 hole design and are available with either a straight or sloped tooth to change or preserve the native tibial slope. The simplistic design facilitates minimally invasive surgery and is optimal for lower demand patients.
These plates are fixated using Arthrex titanium locking 6.5 mm cancellous and 4.5 mm cortical screws. Each screw can be angled to the proper anatomic orientation within a swiveling bushing before being locked to the plate.
Stainless Steel
The stainless steel Tibial Opening Wedge Osteotomy Plates are available with either a straight or sloped tooth to change or preserve the native tibial slope. These plates are optimal for unique anatomy where customizing fit with multiple bends may be required. The plates are fixated using standard AO stainless steel 6.5 mm cancellous and 4.5 mm cortical screws.
All of the Tibial Opening Wedge Osteotomy Plates were designed to work in conjunction with the standard <a href="http://www.arthrex.com/knee/opening-wedge-osteotomy-instrument-set">Opening Wedge Osteotomy Instrument Sets</a>.

Tibial Opening Wedge Osteotomy Plates

Child (D)

Procedure

After determining the angle of correction preoperatively, the medial exposure of the tibia is established and the anterior, medial, and posterior soft tissues are safely elevated. The tibial osteotomy then begins by placing the Arthrex® HTO Cutting Guide on the medial tibia and drilling two 2.4 mm guide pins to within approximately 1 cm of the lateral cortex under fluoroscopy control. The surgeon may also choose to use the Arthrex Biplanar Alignment Guide to set the height and align the osteotomy with the patient's native tibial slope. Once the desired Arthrex Cutting Guide and retractors are in place, the osteotomy is completed utilizing an osteotome or specific saw blade. The osteotomy is then opened to the desired amount of correction via the Arthrex iBalance® HTO Opening Jack, Osteotome Jack or Osteotomy Wedge.

Plate, Tibial A/P Sloped Osteotomy, 15 mm

AR-13200ST-15.0

Related Pages

Knee

Tibial Opening Wedge Osteotomy Plates

Product

Knee

Tibial Opening Wedge

Procedure