Reusable Obturator for AR-6530TD, AR-6530, AR-6530N or AR-6570F

Finished Product

AR-6531

Knee

Product

Las cánulas PassPort ayudan a maximizar la visibilidad y la maniobrabilidad dentro y fuera del espacio de trabajo artroscópico. De diseño moldeado, con bordes blandos de bajo perfil. Estos bordes contribuyen a proteger los tejidos blandos de los instrumentos afilados. Dichos bordes también impiden quela cánula se salga durante la extracción delinstrumental

The Knee Obturator has been specially designed to simplify the location and creation of posterior knee portals, as well as introduction of a cannula. Posterior portals are often necessary for several common procedures such as loose body removal, PCL reconstruction, meniscal root avulsion repair and popliteal cyst debridement. The knee obturator saves time and adds a measure of safety to the procedure when compared to traditional outside-in techniques with a spinal needle. The knee obturator also allows easy insertion of the Passport Button Cannula utilizing traction sutures. Once inserted, the Passport Cannula facilitates easy passage of straight and curved instruments or an arthroscope into the posterior compartment.

Not Hidden

English  - en

video

Simplified Posterior Portal Creation and Cannula Insertion Using the Knee Obturator

application/pdf

04/22/16 12 mm x 3 cm PassPort Button™ Cannula KH1-0366-EN ACLR and SCR graft passing and suture management A new and larger PassPort Button cannula is now available from Arthrex. The larger 12 mm diameter and 3 cm length is the ideal size for graft passing and suture management for a variety of procedures. Similar with other PassPort cannulas, the 12 mm x 3 cm uses a flexible silicone material that forms to portal incisions and protects soft tissue and cartilage. The flexible flange allows unconstrained maneuverability of instruments while providing tissue retraction for ease of viewing. The 3 cm length PassPort cannula is packaged with two 5 mm spacers that can be used for shorter portals, reducing the length by 5 or 10 millimeters. Ordering Information Item # Description Stock List AR-6592-12-30 Arthrex PassPort Button Cannula, 12 mm ID x 30 mm $ 60 $ 86 *AR-6592-12-30 is packaged one per box* AR-6592 PassPort Hemostat $145 $208 Drew Osika Product Manager, Knee Arthroscopy NEW PRODUCT LAUNCH BULLETIN DATE SUBJECT NUMBER KN EE A ND H IP This information is provided for internal use only. It is not intended for general distribution. Arthrex, Inc. Naples, Florida Grasping and Inserting the PassPort There are two recommended methods to grasp the PassPort cannula with a hemostat: 1. Fold the outer flange of the PassPort cannula in half and grasp with the curved PassPort Hemostat (AR-6592). Allow space at the tip of the hemostat to act as a guide through the portal. Insert and verify the PassPort cannula flange is through the portal. Release and retract the hemostat when fully inserted. 2. Insert a straight grasper or hemostat through the PassPort cannula. Fold the flange over into the jaw. Be sure to grab a large enough bite of the flange to prevent it from tearing. ACL Reconstruction Medial Portal Application The larger diameter accommodates grafts with a diameter up to 12 mm. Ideal for suture management prior to graft passing, the PassPort cannula can be inserted into the medial portal before retrieving the passing sutures through the cannula. The portal may need to be enlarged slightly to accommodate the larger cannula. SCR Lateral Portal Application The 12 mm ID PassPort Cannula is a great new option to help with suture management and also allowing direct graft passage. The PassPort portal incision should be sufficient to not overly compress the PassPort lumen, decreasing its functionality. This information is provided for internal use only. It is not intended for general distribution. Arthrex, Inc. Naples, Florida KN EE A ND H IP

12 mm x 3 cm PassPort™ Button Cannula ACLR and SCR Graft Passing and Suture Management

An incision is made over the obturator, exposing the tip (a). Note: The incision should be made at a safe distance from neurovascular structures. The Obturator is placed in the medial portal for posteromedial portal creation. 2 1 3 Knee Obturator for Posterior Portals Plastic Cannula Option A threaded cannula can be placed over the obturator from outside/in. Note, it may be necessary to open the incision or capsule further before introducing a larger diameter cannula. Alternatively, an Open Cannula may be used and slid down the side of the Knee Obturator during insertion. 1 2 a The Knee Obturator has been specially designed to simplify the location and creation of posterior knee portals, as well as introduction of a cannula. Posterior portals are often necessary for several common procedures such as; loose body removal, PCL reconstruction, meniscal root avulsion repair and popliteal cyst debridement. Current outside/in techniques can be time-consuming and put posterior structures at risk of damage with sharp spinal needles and scalpels. The Knee Obturator lets surgeons quickly create the portal from the inside/out. The unique curvature fits around the cruciate ligaments and around the back of the femoral condyles. The tapered eyelet tip facilitates insertion of a PassPort Button Cannula™ with a traction suture or acts as a switching stick for cannula insertion. The tip of the obturator is placed around femoral condyle and against the capsule until the tip can be palpated or seen tenting the skin. The PassPort sutures are placed into the Knee Obturator eyelet and pulled through the knee. The PassPort Button Cannula is pulled into place. Note, it may be necessary to open the incision or capsule further before introducing the PassPort Button Cannula. 3 4 ©2013, Arthrex Inc. All rights reserved. U.S. PATENT NO. 6,716,234 and PATENTS PENDING LT1-0190-EN_A PassPort Button Cannula Option For PassPort Button Cannula insertion, two #2 FiberWire® sutures can be placed into the “neck” of the cannula using the curved needle. These can be used as traction sutures to pull the cannula into the knee. 2 1 5 Ordering Information Knee Obturator for Posterior Portal AR-1266 Non-ratcheting Screwdriver Handle AR-1999NR PassPort Button Cannula, 6 mm I.D. x 4 cm AR-6592-06-40 PassPort Button Cannula, 6 mm I.D. x 5 cm AR-6592-06-50 Articulating Paddle Elevator, w/depth markings AR-8630 Open Cannula, blunt tip AR-6507 Clear Open Cannula, blunt AR-6507-02 Crystal Cannula, partially threaded AR-6564 Partially Threaded Cannula, 7 mm x 7 cm AR-6567

Knee Obturator for Posterior Portals

The Flexible Arthroscopy Retractor is made of tear-resistant polyurethane and has been designed to retract soft tissue and improve visualization in the posterior aspect of the knee during arthroscopic procedures. Retraction of soft tissue and clear visualization of the posterior tibial plateau is necessary in PCL procedures and can be beneficial for loose body removal, meniscal root avulsion and popliteal cyst debridement. Using a curved needle, place a #2 FiberWire into the side of the Flexible Arthroscopy Retractor prior to insertion. This can be used to help place the FAR correctly, as well as remove it. ARTHREX Flexible Arthroscopy Retractor 1 U.S. PATENT NOS. 6,716,234; 8,038,652 and PATENT PENDING © 2014, Arthrex Inc. All rights reserved. LS1-0154-EN_A Through a PassPort Button Cannula™ placed in the posteromedial portal, use a hemostat to reduce the size of the FAR and push it into the knee. To remove the FAR, pull on the sutures outside the knee. The FAR should exit the joint easily. If there is excessive resistance, stop pulling and readjust the angle of the FAR inside the knee to make for easy removal. ORDERING INFORMATION Flexible Arthroscopy Retractor AR-1262 The FAR can be guided, arthroscopically, into place using graspers or a probe. The arrow should be facing up (proximal) and the distal portion of the retractor should sit down below the tibial plateau. Either side of the polyurethane (smooth or brushed) can face into the joint. 2 4 3

Arthrex Flexible Arthroscopy Retractor

Cánulas PassPort™ Button

Child (D)

Shoulder

La cánula transparente Twist-In permite la visualización artroscópica directa de los instrumentos y el paso de las suturas a través de la cánula. El atado de nudos artroscópicos se simplifica dado que se pueden observar y corregir las suturas torcidas y enredadas durante el atado de nudos artroscópicos. La opción flexible se adapta fácilmente a instrumentos grandes o curvos. Cada cánula viene con una tapa antiderrame y obturador descartable. El diseño roscado inhibe en gran medida la caída de la cánula durante la remoción del instrumento y permite la retracción de la cápsula para brindar visualización. El canal lateral se puede usar para entrada de irrigación o salida pasiva.

Cánula Twist-In™

La cánula transparente Twist-In permite la visualización artroscópica directa de los instrumentos a través de la cánula. La opción flexible se adapta fácilmente a instrumentos grandes o curvos. Cada cánula viene con una tapa antiderrame y obturador descartable. El diseño roscado inhibe en gran medida la caída de la cánula durante la remoción del instrumento y permite la retracción de la cápsula para brindar visualización. El puerto lateral se puede usar para entrada de irrigación o salida pasiva.

Elbow

El set para reparación del hombro es una completa selección de instrumentos especializados que facilitan las reparaciones artroscópicas del hombro. El set contiene los instrumentos más utilizados según lo indican prestigiosos cirujanos más de extremidades superiores. Una amplia variedad de instrumentos para suturas artroscópicas ofrecen numerosas opciones para resolver la mayor parte de las variaciones anatómicas. Los obturadores canulados facilitan la dilatación del portal y la inserción de cánulas transparentes de diferentes tamaños por sobre un Switching Stick o Wissinger Rod. La caja de aluminio anodizado posee dos estantes desmontables a medida para instrumental de sutura y obturadores de cánulas. Pueden agregarse instrumentos adicionales.

Reusable Obturator for AR-6530TD, AR-6530, AR-6530N or AR-6570F

AR-6531

Agregar al carrito

AR-6531 pertenece a Establecer artículos de (2)

AR-8402S

AR-8402MS

Páginas Relacionadas

Rodilla

Cánulas PassPort™ Button

Producto

Hombro

Cánula Twist-In™

Producto

Rodilla

Cánula Twist-In™

Producto

Codo

Cánula Twist-In™

Producto

Hombro

Set para hombro

Producto