Name: Minimally Invasive Hammertoe Deformity Correction
Uploaded: 2020-08-31T00:00:00Z
Channel: Arthrex
Description: This animation shows a minimally invasive approach to correcting hammertoe deformities using Arthrex's MIS platform to prepare the PIP joint through a small incision. Final fixation is achieved with a 2.5 mm Micro Compression FT™ screw.

<p>This animation shows a minimally invasive approach to correcting hammertoe deformities using Arthrex's MIS platform to prepare the PIP joint through a small incision. Final fixation is achieved with a 2.5 mm Micro Compression FT™ screw.</p>

Not Hidden

English  - en

video

AN1-000072-en-US | A | Minimally Invasive Hammertoe Deformity Correction

Human

A general overview including the relevant steps of an Arthrex surgical technique. These animations always include a voice-over explaining the process.

Eine allgemeine Übersicht, einschließlich der relevanten Schritte einer Arthrex Operationsanleitung. Diese Animationen enthalten immer Voice-Overs, die den Prozess erklären.

Operationstechnik-Animationen

Surgical Technique Animations

Visão geral incluindo as etapas relevantes de uma técnica cirúrgica Arthrex. Essas animações sempre incluem uma narração explicando o processo.

Animações de técnicas cirúrgicas

Descripción general que incluye los pasos relevantes de una técnica quirúrgica de Arthrex. Estas animaciones siempre incluyen una voz en off que explica el proceso.

Animaciones de técnicas quirúrgicas

Minimally Invasive Hammertoe Deformity Correction

Arthrex presents a minimally invasive approach to hammertoe to correct hammertoe deformities. Initially, a small transverse incision is made over the pip joint. The two millimeter by eight millimeter burr is inserted into the Pip joint and used in a sweeping motion to prepare the head of the proximal phalanx and base of the middle phalanx for fusion. Next, a 0.86mm K-wires is inserted into the central portion of the proximal phalanx, and a 2.0mm cannulated drill is used to drill into the proximal phalanx. Both the drill and wire are removed. The 0.86mm wire is then advanced into the middle phalanx and out of the distal phalanx. The 2.0mm cannulated drill is used to drill through both the middle and distal phalanx. Next, the K-wires is retracted into the middle phalanx. The toe is straightened into a corrected position, and the K-wires is advanced back into the proximal phalanx. While using your non-dominant hand to maintain the desired orientation of the toe insert. A 2.5mm compression screw to complete the correction. When fuzing the pip joint, only the typical screw length ranges from 24 to 34mm, and can be confirmed by using fluoroscopy and superimposing a compression screw over the top of the pip joint. When opting to fuze the pip and dip joints, it is critical to remain central in the distal phalanx when implanting hardware to avoid post-operative irritation. Typical screw lengths range from 30 to 40mm and can be confirmed using the Cannulated depth gauge.

Minimally Invasive Hammertoe Deformity Correction

Verwandte Seiten

Hand & Handgelenk

Operationstechnik mit Compression FT-Schrauben

Operationsverfahren

Fuß & Sprunggelenk

Minimal-invasive Chirurgie

Operationsverfahren