Finished Product

AR-13223C

Low Profile Screw System 2.0 / 2.3 / 3.0 mm Set

Foot and Ankle

Procedure

An Akin osteotomy is a medial closing wedge osteotomy of the proximal phalanx of the great toe. It is used to correct hallux valgus interphalangeus. The Akin osteotomy is usually a component of a primary procedure in which a hallux valgus deformity is corrected. The osteotomy site is fixed with a DynaNite™ Nitinol staple, low-profile QuickFix™ cannulated screw, QuickFix Staples, or Plaple® fixation system.

Not Hidden

English  - en

application/pdf

OP-Anleitungen

Guias de técnicas cirúrgicas

Guías de técnicas quirúrgicas

Surgical Technique Guides

DynaNite® Nitinol Staple for Akin Osteotomy Surgical Technique Use the DynaNite staple sizing guide to determine the correct DynaNite staple size. Open the corresponding DynaNite staple kit. Expose the surgical site and create a closing wedge osteotomy while preserving the lateral cortex hinge. The stability of the osteotomy is enhanced by leaving the lateral cortex intact. Option: Insert a guidewire obliquely to reduce the osteotomy. Remove the DynaNite delivery device (with preloaded DynaNite staple) from the sterilized kit. The DynaNite staple legs are in tension against the delivery device, but are not yet fully opened to parallel. Center the DynaNite drill guide across the osteotomy site. Use the DynaNite drill bit to drill the first hole in the proximal portion of the osteotomy site. Note: The drill bit is laser-marked to help drill to the correct depth. DynaNite® Nitinol Staple for Akin Osteotomy 21 3 4 Drill the second hole on the distal portion of the fusion site using the drill bit and drill guide. If desired, insert the second alignment pin. Remove the drill guide, leaving the alignment pins in place to help identify drill hole locations. Insert a DynaNite® alignment pin through the drill guide into the first drilled hole. Turn the knob on the DynaNite delivery device clockwise until the staple legs are open to a width equal to the predrilled holes. Note: The staple legs should be in a parallel, or near parallel, position prior to insertion to facilitate compression of the osteotomy once the staple is inserted. Remove the alignment pin(s) from the drilled hole(s). Hold the drill guide against the cortical surface to maintain the location of the drill holes. DynaNite® Nitinol Staple for Akin Osteotomy 65 7 8 DynaNite® Nitinol Staple for Akin Osteotomy Using the delivery device, advance the staple legs into the drill holes until the device is seated against the bone. A mallet can be used if necessary. Use the windows in the drill guide to help position the tips of the staple legs into the drilled holes. Once the surgeon is satisfied with the position of the staple, the drill guide can be removed. Once the DynaNite® staple is inserted and seated against the bone, turn the delivery device knob counterclockwise until the staple is no longer under tension with the delivery device. Slide the delivery device away from the staple. Remove the guidewire if one has been used in the procedure. 109 11 12 The low-profile DynaNite staple is seated flush to the cortical surface. Use the DynaNite tamp to fully seat the staple against the cortical surface. DynaNite® Nitinol Staple for Akin Osteotomy 1413 This description of technique is provided as an educational tool and clinical aid to assist properly licensed medical professionals in the usage of specific Arthrex products. As part of this professional usage, the medical professional must use their professional judgment in making any final determinations in product usage and technique. In doing so, the medical professional should rely on their own training and experience and should conduct a thorough review of pertinent medical literature and the product’s directions for use. Postoperative management is patient-specific and dependent on the treating professional’s assessment. Individual results will vary and not all patients will experience the same postoperative activity level or outcomes. View U.S. patent information at www.arthrex.com/corporate/virtual-patent-marking © 2019 Arthrex, Inc. All rights reserved. | www.arthrex.com | LT1-00095-EN_B Ordering Information DynaNite® Nitinol Compression Staples Product Description Item Number DynaNite Nitinol Staple, 9 mm × 7 mm DynaNite Nitinol Staple With Instrumentation, 9 mm × 7 mm DynaNite Nitinol Staple, 9 mm × 10 mm DynaNite Nitinol Staple With Instrumentation, 9 mm × 10 mm DynaNite Nitinol Staple, 11 mm × 10 mm DynaNite Nitinol Staple With Instrumentation, 11 mm × 10 mm DynaNite Nitinol Staple, 11 mm × 15/12 mm DynaNite Nitinol Staple With Instrumentation, 11 mm × 15/12 mm DynaNite Nitinol Staple, 13 mm × 10 mm DynaNite Nitinol Staple With Instrumentation, 13 mm × 10 mm DynaNite Nitinol Staple, 13 mm × 15/12 mm DynaNite Nitinol Staple With Instrumentation, 13 mm × 15/12 mm DynaNite Nitinol Staple, 15 mm × 12 mm DynaNite Nitinol Staple With Instrumentation, 15 mm × 12 mm DynaNite Nitinol Staple, 15 mm × 15 mm DynaNite Nitinol Staple With Instrumentation, 15 mm × 15 mm DynaNite Nitinol Staple, 18 mm × 15 mm DynaNite Nitinol Staple With Instrumentation, 18 mm × 15 mm DynaNite Nitinol Staple, 18 mm × 18 mm DynaNite Nitinol Staple With Instrumentation, 18 mm × 18 mm DynaNite Nitinol Staple, 18 mm × 18/15 mm DynaNite Nitinol Staple With Instrumentation, 18 mm × 18/15 mm DynaNite Nitinol Staple, 20 mm x 15 mm DynaNite Nitinol Staple With Instrumentation, 20 mm × 15 mm DynaNite Nitinol Staple, 20 mm × 20 mm DynaNite Nitinol Staple With Instrumentation, 20 mm × 20 mm DynaNite Nitinol Staple, 25 mm × 20 mm DynaNite Nitinol Staple With Instrumentation, 25 mm × 20 mm AR-8717-0907 AR-8717DS-0907 AR-8717-0910 AR-8717DS-0910 AR-8717-1110 AR-8717DS-1110 AR-8717-111512 AR-8717DS-111512 AR-8718-1310 AR-8718DS-1310 AR-8718-131512 AR-8718DS-131512 AR-8718-1512 AR-8718DS-1512 AR-8719-1515 AR-8719DS-1515 AR-8719-1815 AR-8719DS-1815 AR-8719-1818 AR-8719DS-1818 AR-8719-181815 AR-8719DS-181815 AR-8719-2015 AR-8719DS-2015 AR-8719-2020 AR-8719DS-2020 AR-8719-2520 AR-8719DS-2520 Optional Sizing Guide AR-8717T Products advertised in this brochure/surgical technique guide may not be available in all countries. For information on availability, please contact Arthrex Customer Service or your local Arthrex representative.

DynaNite® Nitinol Staple for Akin Osteotomy

Thomas G. Harris, MD, (Pasadena, CA) performs an Akin osteotomy on the hallux valgus using a DynaNite® Nitinol staple.

video

Videos - OP-Anleitung

Vídeos — Técnicas cirúrgicas

Videos de técnicas quirúrgicas

Surgical Technique Videos

Akin Osteotomy Using the DynaNite® Nitinol Staple

Jorge I. Acevedo, MD, (Jacksonville, FL) demonstrates a minimally invasive chevron and Akin osteotomy to correct a bunion deformity. The corresponding full length sawbones video can be found via this link: <a href="https://www.arthrex.com/link/asset/QH0Wuk5dekmuFwFk1-5g6w">https://www.arthrex.com/link/asset/QH0Wuk5dekmuFwFk1-5g6w</a>

Minimally Invasive Chevron and Akin Osteotomy

Arthrex Minimally Invasive Bunionectomy

Akin Osteotomy

Screw, Cortical, 2.3 mm x 8 mm, SS

Tornillo, hueso cortical, Ø 2.3 mm x 8 mm, acero inoxidable

Parafuso, cortical, 2.3 mm x 8 mm, aço inoxidável

Screw, Cortical, 2.3 mm x 10 mm, SS

Tornillo, hueso cortical, Ø 2.3 mm x 10 mm, acero inoxidable

Parafuso, cortical, 2.3 mm x 10 mm, aço inoxidável

Screw, Cortical, 2.3 mm x 12 mm, SS

Tornillo, hueso cortical, Ø 2.3 mm x 12 mm, acero inoxidable

Parafuso, cortical, 2.3 mm x 12 mm, aço inoxidável

Screw, Cortical, 2.3 mm x 14 mm, SS

Tornillo, hueso cortical, Ø 2.3 mm x 14 mm, acero inoxidable

Parafuso, cortical, 2.3 mm x 14 mm, aço inoxidável

Screw, Cortical, 2.3 mm x 16 mm, SS

Tornillo, hueso cortical, Ø 2.3 mm x 16 mm, acero inoxidable

Parafuso, cortical, 2.3 mm x 16 mm, aço inoxidável

Screw, Cortical, 2.3 mm x 18 mm, SS

Tornillo, hueso cortical, Ø 2.3 mm x 18 mm, acero inoxidable

Parafuso, cortical, 2.3 mm x 18 mm, aço inoxidável

Screw, Cortical, 2.3 mm x 20 mm, SS

Tornillo, hueso cortical, Ø 2.3 mm x 20 mm, acero inoxidable

Parafuso, cortical, 2.3 mm x 20 mm, aço inoxidável

Screw, Cortical, 2.3 mm x 22 mm, SS

Tornillo, hueso cortical, Ø 2.3 mm x 22 mm, acero inoxidable

Parafuso, cortical, 2.3 mm x 22 mm, aço inoxidável

Screw, Cortical, 2.3 mm x 24 mm, SS

Tornillo, hueso cortical, Ø 2.3 mm x 24 mm, acero inoxidable

Parafuso, cortical, 2.3 mm x 24 mm, aço inoxidável

2.0 mm Drive Shaft for QuickFix Screw System

Schraubendreheraufsatz, 2.0 mm für QuickFix Screw System

2.0 mm Drive Shaft for QuickFix Screw System

Vástago de destornillador de Ø 2 mm para sistema de tornillos QuickFix

Chave 2 mm para sistema de parafusos QuickFix

McGlamry Metatarsal Elevator, 11 mm

Cortatornillos, tornillo QuickFix, Ø 2 mm

Kanülierter Bohrer, 2.0 mm für AR-8933-xxPT (AO Anschluß)

Bohrhülse, 1.1 / 2.0 mm, für AR-8933-xxPT

Screw Holding Forceps, Self-Retaining

Haltenzange für Low Profile Kortikalisschrauben

Pinzas de sujeción de tornillo con autorretención

Handle, Quick Coupling Ratcheting, Cannulated

Handle, Quick Coupling Ratcheting, Cannulated

Punho, Lingueta de rápida acoplagem, canulado

QuickFix Screw, Titanium, 2 mm x 10 mm

QuickFix Schraube, Titan, 2.0 mm x 10.0 mm

Tornillo QuickFix de Arthrex, Ti, Ø 2 mm x 10 mm

Parafuso Arthrex QuickFix, Ti, 2 mm x 10 mm

QuickFix Screw, Titanium, 2 mm x 11 mm

QuickFix Schraube, Titan, 2.0 mm x 11.0 mm

Tornillo QuickFix de Arthrex, Ti, Ø 2 mm x 11 mm

Parafuso Arthrex QuickFix, Ti, 2 mm x 11 mm

QuickFix Screw, Titanium, 2 mm x 12 mm

QuickFix Schraube, Titan, 2.0 mm x 12.0 mm

Tornillo QuickFix de Arthrex, Ti, Ø 2 mm x 12 mm

Parafuso Arthrex QuickFix, Ti, 2 mm x 12 mm

QuickFix Screw, Titanium, 2 mm x 13 mm

QuickFix Schraube, Titan, 2.0 mm x 13.0 mm

Tornillo QuickFix de Arthrex, Ti, Ø 2 mm x 13 mm

Parafuso Arthrex QuickFix, Ti, 2 mm x 13 mm

QuickFix Screw, Titanium, 2 mm x 14 mm

QuickFix Schraube, Titan, 2.0 mm x 14.0 mm

Tornillo QuickFix de Arthrex, Ti, Ø 2 mm x 14 mm

Parafuso Arthrex QuickFix, Ti, 2 mm x 14 mm

QuickFix Screw, Titanium, 3 mm x 13 mm

QuickFix Schraube, Titan, 3.0 mm x 13.0 mm

Tornillo QuickFix de Arthrex, Ti, Ø 3 mm x 13 mm

Parafuso Arthrex QuickFix, Ti, 3 mm x 13 mm

QuickFix Screw, Titanium, 3 mm x 15 mm

QuickFix Schraube, Titan, 3.0 mm x 15.0 mm

Tornillo QuickFix de Arthrex, Ti, Ø 3 mm x 15 mm

Parafuso Arthrex QuickFix, Ti, 3 mm x 15 mm

QuickFix Screw, Titanium, 3 mm x 17 mm

QuickFix Schraube, Titan, 3.0 mm x 17.0 mm

Tornillo QuickFix de Arthrex, Ti, Ø 3 mm x 17 mm

Parafuso Arthrex QuickFix, Ti, 3 mm x 17 mm

QuickFix Screw, Titanium, 3 mm x 19 mm

QuickFix Schraube, Titan, 3.0 mm x 19.0 mm

Tornillo QuickFix de Arthrex, Ti, Ø 3 mm x 19 mm

Parafuso Arthrex QuickFix, Ti, 3 mm x 19 mm

Child (D)

A chevron osteotomy is the most common technique used to correct mild to moderate bunion deformities. Traditionally, this procedure has been performed through an open approach. However, since the advent of minimally invasive surgery (MIS), surgeons now have the option to perform a chevron osteotomy through small percutaneous incisions. Following the osteotomy, the capital fragment is shifted laterally and fixated with either Compression FT screws for the MIS approach or Compression PT screws for the traditional open approach.

Chevron Osteotomy

Implant Delivery System, TRIM-IT Drill Pin,1.5 mm x 100 mm

TRIM-IT Drill Pin Verbrauchskit, 1.5 mm x 100 mm, VE5, steril, IM

TRIM-IT Drill Pin Disposables Kit, 1.5 mm x 100 mm

Kit de instrumental desechable TRIM-IT Drill Pin, Ø 1.5 mm x 100 mm

Kit de descartáveis TRIM-IT Drill Pin, 1.5 mm x 100 mm

Implant System, TRIM-IT Drill Pin, 2 x 100 mm

TRIM-IT Drill Pin Verbrauchskit, 2 mm x 100 mm, steril

TRIM-IT Drill Pin Disposables Kit, 2 mm x 100 mm

Kit de instrumental desechable TRIM-IT Drill Pin, Ø 2 mm x 100 mm

Kit de descartáveis TRIM-IT Drill Pin, 2 mm x 100 mm

Bio-Compression Screw, 3.0 x 16 mm

Bio-Compression Schraube, 3.0 x 16.0 mm, steril, IM

Tornillo de biocompresión, Ø 3 mm x 16 mm

Bio-Compression Screw, 3.0 x 18 mm

Bio-Compression Schraube, 3.0 x 18.0 mm, steril, IM

Tornillo de biocompresión, Ø 3 mm x 18 mm

Bio-Compression Screw, 3.0 x 20 mm

Bio-Compression Schraube, 2.7 x 20.0 mm, steril, IM

Tornillo de biocompresión, Ø 2.7 mm x 20 mm

Bio-Compression Screw, 3.0 x 22 mm

Bio-Compression Schraube, 3.0 x 22 mm, steril, IM

Tornillo de biocompresión, Ø 3 mm x 22 mm

Bio-Compression Screw, 3.0 x 24 mm

Bio-Compression Schraube, 3.0 x 24 mm, steril, IM

Tornillo de biocompresión, Ø 3 mm x 24 mm

Bio-Compression Screw, 3.0 x 26 mm

Bio-Compression Schraube, 3.0 x 26 mm, steril, IM

Tornillo de biocompresión, Ø 3 mm x 26 mm

Bio-Compression Screw Instrument Set

Headless Compression Screw, Cannulated, 3.0 x 10 mm

Doppelgewindeschrauben, kanüliert, 3.0 mm, Länge 10 mm

Headless Compression Screw, cannulated 3.0 x 10 mm

Tornillo de compresión sin cabeza, 3.0 x 10 mm, Ti, canulado

Headless Compression Screw, Cannulated, 3.0 x 12 mm

Doppelgewindeschrauben, kanüliert, 3.0 mm, Länge 12 mm

Headless Compression Screw, cannulated 3.0 x 12 mm

Tornillo de compresión sin cabeza, 3.0 x 12 mm, Ti, canulado

Headless Compression Screw, Cannulated, 3.0 x 14 mm

Doppelgewindeschrauben, kanüliert, 3.0 mm, Länge 14 mm

Headless Compression Screw, cannulated 3.0 x 14 mm

Tornillo de compresión sin cabeza, 3.0 x 14 mm, Ti, canulado

Headless Compression Screw, Cannulated, 3.0 x 16 mm

Doppelgewindeschrauben, kanüliert, 3.0 mm, Länge 16 mm

Headless Compression Screw, cannulated 3.0 x 16 mm

Tornillo de compresión sin cabeza, 3.0 x 16 mm, Ti, canulado

Headless Compression Screw, Cannulated, 3.0 x 18 mm

Doppelgewindeschrauben, kanüliert, 3.0 mm, Länge 18 mm

Headless Compression Screw, cannulated 3.0 x 18 mm

Tornillo de compresión sin cabeza, 3.0 x 18 mm, Ti, canulado

Headless Compression Screw, Cannulated, 3.0 x 20 mm

Doppelgewindeschrauben, kanüliert, 3.0 mm, Länge 20 mm

Headless Compression Screw, cannulated 3.0 x 20 mm

Tornillo de compresión sin cabeza, 3.0 x 20 mm, Ti, canulado

Headless Compression Screw, Cannulated, 3.0 x 22 mm

Doppelgewindeschrauben, kanüliert, 3.0 mm, Länge 22 mm

Headless Compression Screw, cannulated 3.0 x 22 mm

Tornillo de compresión sin cabeza, 3.0 x 22 mm, Ti, canulado

Headless Compression Screw, Cannulated, 3.0 x 24 mm

Doppelgewindeschrauben, kanüliert, 3.0 mm, Länge 24 mm

Headless Compression Screw, cannulated 3.0 x 24 mm

Tornillo de compresión sin cabeza, 3.0 x 24 mm, Ti, canulado

Headless Compression Screw, Cannulated, 3.0 x 26 mm

Doppelgewindeschrauben, kanüliert, 3.0 mm, Länge 26 mm

Headless Compression Screw, cannulated 3.0 x 26 mm

Tornillo de compresión sin cabeza, 3.0 x 26 mm, Ti, canulado

Headless Compression Screw, Cannulated, 3.0 x 28 mm

Doppelgewindeschrauben, kanüliert, 3.0 mm, Länge 28 mm

Headless Compression Screw, cannulated 3.0 x 28 mm

Tornillo de compresión sin cabeza, 3.0 x 28 mm, Ti, canulado

Headless Compression Screw, Cannulated, 3.0 x 30 mm

Doppelgewindeschrauben, kanüliert, 3.0 mm, Länge 30 mm

Headless Compression Screw, cannulated 3.0 x 30 mm

Tornillo de compresión sin cabeza, 3.0 x 30 mm, Ti, canulado

Headless Compression Screw, Cannulated, 3.0 x 32 mm

Doppelgewindeschrauben, kanüliert, 3.0 mm, Länge 32 mm

Headless Compression Screw, cannulated 3.0 x 32 mm

Tornillo de compresión sin cabeza, 3.0 x 32 mm, Ti, canulado

Headless Compression Screw, Cannulated, 3.0 x 34 mm

Doppelgewindeschrauben, kanüliert, 3.0 mm, Länge 34 mm

Headless Compression Screw, cannulated 3.0 x 34 mm

Tornillo de compresión sin cabeza, 3.0 x 34 mm, Ti, canulado

Headless Compression Screw, Cannulated, 3.0 x 36 mm

Doppelgewindeschrauben, kanüliert, 3.0 mm, Länge 36 mm

Headless Compression Screw, cannulated 3.0 x 36 mm

Tornillo de compresión sin cabeza, 3.0 x 36 mm, Ti, canulado

Compression FT Screw, 4.0 Standard, 16 mm Length

Standard-Compression FT, Titan, 4 mm x 16 mm

Standard Compression FT, titanium, 4 mm x 16 mm

Tornillo de compresión FT, 4 estándar, 16 mm longitud

Parafuso de compressão FT, padrão 4, 16 mm de comprimento

Compression FT Screw, 4.0 Standard, 18 mm Length

Standard-Compression FT, Titan, 4 mm x 18 mm

Standard Compression FT, titanium, 4 mm x 18 mm

Tornillo de compresión FT, 4 estándar, 18 mm longitud

Parafuso de compressão FT, padrão 4, 18 mm de comprimento

Cannulated Screwdriver Shaft

AR-13223C

Add to Cart

AR-13223C is a Set Item Of (1)

AR-8932S

Related Pages

Foot and Ankle

Akin Osteotomy

Procedure

Foot and Ankle

Chevron Osteotomy

Procedure

Foot and Ankle

Cotton Osteotomy

Procedure

Foot and Ankle

Metatarsal Shortening Osteotomy

Procedure

Foot and Ankle

Low Profile Screw Set

Product